XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Shock Oil Problem with Much More MR33 and other brands https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12599 |
Page 1 of 1 |
Author: | Chrisi [ Wed May 16, 2012 20:52:45 ] |
Post subject: | Shock Oil Problem with Much More MR33 and other brands |
Hy, does anyone know whether Much More only a 0 apending by the fluid hardness? I read in a Forum that MM in Europe made this like 45(wt) is by MM 450. I think everytime all manufacturers calculate from cst to wt or wt to wst. Is this correct? And how is this by MR33 Shock oil? Is this the same like MuchMore or is this Oil converted from wt to cps? Because I tried much Oil manufacturers and the oils are different. I take a 42,5 wt Oil and a 500 oil and the Oils are different. When i calculate a 42,5 wt to cps it is a ~ 520 cps And when I look the Setup Sheets from Alexander Hagberg and I tried this Setup for example with a 500 oil, my springs are always to soft. When i take a 50 wt oil it is ok and the Setup works! Now I think that, because the Oils are different. Has anybody a answer for me? Regards Christian |
Author: | Skiddins [ Wed May 16, 2012 21:33:45 ] |
Post subject: | Re: Shock Oil Problem with Much More MR33 and other brands |
They do vary, but thery shouldn't. Cps is a standard, wt is not, so in theory the Much More and the Xray oils should be the same, or at least very similar. |
Author: | Hagberg [ Thu May 17, 2012 06:58:00 ] |
Post subject: | Re: Shock Oil Problem with Much More MR33 and other brands |
Just use XRAY oils as specified by the set-up sheets and you will be fine. Yes, the Muchmore oils are very similar in weight to XRAY ones. |
Author: | Chrisi [ Thu May 17, 2012 08:37:51 ] |
Post subject: | Re: Shock Oil Problem with Much More MR33 and other brands |
Thx to Skiddins and Alex for your answers. Regards Christian |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |