| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| T3 '12 rear hubs https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12552 |
Page 1 of 1 |
| Author: | Jack I [ Tue Apr 24, 2012 21:54:55 ] |
| Post subject: | T3 '12 rear hubs |
Hi there, Ive recently brought and raced my new car and it is great!  And noticed that the rear hubs are 0 degrees toe in.. and eveyone else that have brought the car have come with 2 degree toe in as standard? Im i the only one? or was it just a packing error... Jack |
|
| Author: | Andrew Webber [ Tue Apr 24, 2012 22:34:15 ] |
| Post subject: | Re: T3 '12 rear hubs |
Hi Jack, Think you might be confused on how rear toe is added to the T3 because all T3's come with 0 deg rear uprights. Rear toe is added by remove/adding shims at the bulkhead end of the suspension arm. Default rear toe is 3degs. Cheers Andrew |
|
| Author: | Jack I [ Tue Apr 24, 2012 23:45:13 ] |
| Post subject: | Re: T3 '12 rear hubs |
oh ok i see! thanks but mine didnt come with extra shims to do that, but i will get some Jack |
|
| Author: | Andrew Webber [ Fri Apr 27, 2012 08:41:43 ] |
| Post subject: | Re: T3 '12 rear hubs |
Hi Jack, Thats strange for an Xray kit to be missing bits. There should be 6 black 1.5mm shims in the kit. How many did your kit have? 4 go on the front and 2 go on the rear. There should be none on the front of the rear suspension blocks. This means you'll end up with the default 3 degrees of rear toe. Hope that makes sense. Cheers Andrew |
|
| Author: | Jack I [ Fri Apr 27, 2012 18:37:53 ] |
| Post subject: | Re: T3 '12 rear hubs |
hi there yes that does make sence thanks. mine only came with four and i put them on the front. But ive got some shims now and will put them on Jack |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|