XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Ball Diff for the T3 2012 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12544 |
Page 1 of 1 |
Author: | ADRIAN WEBB [ Wed Apr 18, 2012 15:33:39 ] |
Post subject: | Ball Diff for the T3 2012 |
I would like to try a ball diff in the rear of my T3 12, I already have a diff from my T2 009 which has a 34 tooth pulley in it, Can some one confirm that the correct 38 tooth pulley I will need is part number 305058 ?? I have one of these but it just does not look correct? it has alot of extra holes in it which I would think will let the grease escape. |
Author: | Hagberg [ Wed Apr 18, 2012 23:19:16 ] |
Post subject: | Re: Ball Diff for the T3 2012 |
Yes the 38 has some extra "half" outer holes compared to the 34T pulley, this is normal, and they exist for weight reduction. 305058 is the correct part number for the 38T diff pulley. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |