| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| A few new deck questions https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12500 |
Page 1 of 1 |
| Author: | Loheswaran [ Sat Mar 31, 2012 16:23:00 ] |
| Post subject: | A few new deck questions |
Just so I think I am reading this right. For an asphalt set up with the new 2mm chassis one should do the following: 1. put o.5mm shims under the arm mounting blocks all round; 2. should have around about 3000wt oil in the rear diff 3. go softer by one grade on the spring all round ie 2.8 now 2.6. I apologise for the slight vagueness to my question, but when i had the t3'11, I came to my own set up that was somewhat removed from what was the common set-ups ie. I narrowed the front track by 0.5 each side, lowered the front a-arms and put in a tiny amount of anti dive. I also used HPI silver fronts and blue rears. Another question - I have just bought the t3'12 main chassis (my old t3'11 one was tweaked). My old top ddeck was not damaged, and I wanted to know if it is going to be night and day difference changing the top deck to the new t3'12 one, or is the old one perfectly fine? |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|