XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Suggest setup carpet indoor traction grip https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12488 |
Page 1 of 1 |
Author: | Ruben_qlc [ Mon Mar 26, 2012 15:29:23 ] |
Post subject: | Suggest setup carpet indoor traction grip |
Hello eveybody. I coment you: I was trainning on carpet stock racing indoor track the last 2 weeks between 19:00 - 22:00 hours everyday. But the race was yesterday on hours between 10:00 - 16:00 hours in the morning. The track have a good traction, but my car had not grip, because my setup was created for the conditions between 19:00 - 22:00 (maximum grip, which I was tranning 2 week ago). The problem is that time race is in the morning (10:00 - 16:00) when the weather is hot. My car had not enough grip. For the next race, I think do this: - Softer spring shocks - Softer shock oil - ... Any more idea? Thank you very much, regards. |
Author: | Skiddins [ Tue Mar 27, 2012 01:09:15 ] |
Post subject: | Re: Suggest setup carpet indoor traction grip |
Fill out one of the Xray online forms so people can see your setup, that might help. |
Author: | Ruben_qlc [ Tue Mar 27, 2012 18:32:01 ] |
Post subject: | Re: Suggest setup carpet indoor traction grip |
Hello Skiddins. I don't know exaclty what yo want to say... Xray online forum?? |
Author: | Skiddins [ Tue Mar 27, 2012 18:40:17 ] |
Post subject: | Re: Suggest setup carpet indoor traction grip |
If you go here; There is a box near the top 'Create Setup Sheet', you select your car then press the button and fill out the sheet. Once you have saved it you can post a lik to it so we can all see what you have done. ![]() Skiddins |
Author: | Ruben_qlc [ Tue Mar 27, 2012 18:50:54 ] |
Post subject: | Re: Suggest setup carpet indoor traction grip |
AAAAAAAAAAA okok, yes yes, thank you very much. Here is my setup: xform/index.php?act=view&ID=228&setup=t3_2012 The final drive ratio is 5.924 Regards. |
Author: | Skiddins [ Tue Mar 27, 2012 18:53:47 ] |
Post subject: | Re: Suggest setup carpet indoor traction grip |
What exactly do you need the setup to do? Is the car loose or understeering etc? |
Author: | Ruben_qlc [ Tue Mar 27, 2012 18:54:51 ] |
Post subject: | Re: Suggest setup carpet indoor traction grip |
Generally I acuse understeed an entry corner, and need more grip general. |
Author: | Skiddins [ Tue Mar 27, 2012 22:28:31 ] |
Post subject: | Re: Suggest setup carpet indoor traction grip |
You could try some of the following (not all at once); Changing front upper clamp from 1mm to 0.5 or even 0mm Rear downstop 5 Diff oil 700 Rear upper clamp Position 1, front position 2 Shocks to position 4 If you want more grip in general you might want to go softer on the springs; 2.6 front and rear etc. Skiddins |
Author: | Ruben_qlc [ Wed Mar 28, 2012 01:13:19 ] |
Post subject: | Re: Suggest setup carpet indoor traction grip |
Someone you say I just thinked such as: -Rear downstop 5 -Diff oil 700 -Rear upper clamp Position 1, front position 2 I tell you something when I tranning. Thank you very much Skiddins. Regards. |
Author: | Ruben_qlc [ Wed Mar 28, 2012 23:54:29 ] |
Post subject: | Re: Suggest setup carpet indoor traction grip |
I find my problem: My car was accuse understeed because I was using different used tyres in the front and in the rear. I was using more used tyres on the rear, with the consequence those tyres have less diameter... For trainning I changed the tyres between front and rear, and then the car has very fast steering response, because the front tyre have less diameter. Regards. |
Author: | Skiddins [ Thu Mar 29, 2012 00:06:51 ] |
Post subject: | Re: Suggest setup carpet indoor traction grip |
Author: | Ruben_qlc [ Thu Mar 29, 2012 00:12:20 ] |
Post subject: | Re: Suggest setup carpet indoor traction grip |
Yes, exactly I do that since many years. The problem was that the other new tyres was destroyed ![]() To see if I put a video ![]() Thank you Skkidins, regards. |
Author: | Hagberg [ Thu Mar 29, 2012 11:18:19 ] |
Post subject: | Re: Suggest setup carpet indoor traction grip |
I also think that you should try a softer front spring, 2.8, and a harder rear anti-roll bar (1.3). |
Author: | Ruben_qlc [ Thu Mar 29, 2012 12:47:12 ] |
Post subject: | Re: Suggest setup carpet indoor traction grip |
I just know the softer front spring, but not the harder rear antiroll bar. Thank you very much. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |