[phpBB Debug] PHP Warning: in file [ROOT]/includes/session.php on line 561: sizeof(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/includes/session.php on line 611: sizeof(): Parameter must be an array or an object that implements Countable
XRAY - Model racing cars :: View topic - Asphalt foam setup.
XRAY - Model racing cars
https://setup.teamxray.com/xsetup/legacy/

Asphalt foam setup.
https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12460
Page 1 of 1

Author:  nosequehacer [ Mon Mar 19, 2012 13:42:15 ]
Post subject:  Asphalt foam setup.

Hi, here is our dusty low traction track:

http://www.youtube.com/watch?v=wPwUii2XyoM

What changes may I make to run with foams ?

Thank you

Author:  UrabusDenis [ Tue Mar 20, 2012 00:31:16 ]
Post subject:  Re: Asphalt foam setup.

Nothing much, try the basic asphalt set up and work it from there. I also n on foams on low traction asphalt and my set up is quite good (it's basically the basic set up with minor changes). With foams it's very important to check ride height constantly, especially if you combine electric foams (which perform better) and nitro foams (which last A LOT longer but are slower than electric ones- great for practice) since they differ massively in their diameter. If necessary you can remove some screws from the top deck to get extra flex.

Author:  nosequehacer [ Tue Mar 20, 2012 08:45:32 ]
Post subject:  Re: Asphalt foam setup.

Thank you for your answer. So oil and springs are the same ? Camber positions? I´m a little lost

puno hvala

Author:  UrabusDenis [ Tue Mar 20, 2012 10:05:10 ]
Post subject:  Re: Asphalt foam setup.

I use the same oil, 700 in the diff and 350 in shocks. Springs are also the same and work very good but I will try different combinations soon. There is already a thread on this subject (viewtopic.php?f=8&t=12385) with tips from our colleague Green Wing who also races on foams so you should check it out. What foams do you race on?

And you're welcome ;)

Denis

Author:  nosequehacer [ Tue Mar 20, 2012 10:35:37 ]
Post subject:  Re: Asphalt foam setup.

I use Matrix and Enetti, 35 or 37 rear and 37 or 40 front ( depending off weather )

I will take a look to this thread.

Thank you again

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/