XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Help with ECS Driveshaft - Unable to find supplier https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12446 |
Page 1 of 1 |
Author: | anthonybirch1983 [ Mon Mar 12, 2012 15:27:31 ] |
Post subject: | Help with ECS Driveshaft - Unable to find supplier |
Hi, I wondered if anyone may be able to provide me with details of a UK retailer who stocks the pins for the ECS driveshafts. I managed to lose one last week when racing. Also, I noticed two variations, one with a flat spot on the pin, the other without. Can either of these be used? A second query, I have 50mm hudy driveshafts that I used in the front prior to using the ECS ones. I kept breaking the outdrives though and was advised ECS were better, hence the change. Can anyone shed any light on why this may be happening? Thanks in advance lads. ![]() |
Author: | Skiddins [ Mon Mar 12, 2012 15:32:49 ] |
Post subject: | Re: Help with ECS Driveshaft - Unable to find supplier |
THe ECS driveshafts have two types of pin in each driveshaft. 1.5*9 and 1.5*8.5, both are available with flatspots. Try Kevin at Model Cars Reading, 0118 9503321 |
Author: | anthonybirch1983 [ Mon Mar 12, 2012 15:34:22 ] |
Post subject: | Re: Help with ECS Driveshaft - Unable to find supplier |
Do you know which one would be for the outdrive side. The pin near the hub is still ok? |
Author: | moggy12 [ Mon Mar 12, 2012 17:15:11 ] |
Post subject: | Re: Help with ECS Driveshaft - Unable to find supplier |
Author: | Skiddins [ Mon Mar 12, 2012 18:02:37 ] |
Post subject: | Re: Help with ECS Driveshaft - Unable to find supplier |
Author: | anthonybirch1983 [ Tue Mar 13, 2012 11:44:20 ] |
Post subject: | Re: Help with ECS Driveshaft - Unable to find supplier |
Unfortunately he has no stock. I wonder if anyone else maybe knows anywhere I can obtain these? Thanks in advance again. |
Author: | anthonybirch1983 [ Tue Mar 13, 2012 15:06:38 ] |
Post subject: | Re: Help with ECS Driveshaft - Unable to find supplier |
Just thought I'd throw a quick post on the end of this thread. Managed to source some finally. Ordered and hopefully on their way!!!! |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |