| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Lipo balancing weights T3 2012 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12377 |
Page 1 of 1 |
| Author: | dogenia1 [ Tue Feb 14, 2012 15:55:39 ] |
| Post subject: | Lipo balancing weights T3 2012 |
Good morning, could anyone guide me in the direction of where to put the Hudy weights on the T3 2012 chassis. I have 20 g in the center but I'm still missing about 45 grams to make weight. Currently have them stuck on top of the battery which I highly doubt is the best position. I noticed a couple of cutouts in the chassis, would the 293091 and 293092 still fit the 2012 chassis? Otherwise what are the other options to put weight on this chassis? Greetings from the sunny Caribbean. |
|
| Author: | Hagberg [ Thu Feb 16, 2012 13:40:30 ] |
| Post subject: | Re: Lipo balancing weights T3 2012 |
The HUDY parts you mentioned will not fit the 2012 chassis. I recommend you to add 10-15 grams of lead weight in front of the servo and battery. I recommend also to use the 309854 central optional weight which is 30 grams. If it is still not enough you can add weights behind the motor and behind the battery. Make sure that the car is balanced, which depends highly on the weight of the battery and/or the electronics. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|