XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T3 servo saver alignment problem https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12369 |
Page 1 of 1 |
Author: | nashies [ Fri Feb 10, 2012 19:50:46 ] |
Post subject: | T3 servo saver alignment problem |
Hi there, i am having a problem of aligning my T3 2012 servo saver at neutral position...thats mean i cant have to line up 90 degree to the chassis, i checked the servo link and it is 58mm long as it said in the book. When i made it stand 90 degree angle to the chassis, the wheel is turning to the left. Please helpsss |
Author: | martin t [ Fri Feb 10, 2012 20:50:38 ] |
Post subject: | Re: T3 servo saver alignment problem |
You just need to adjust the Turnbuckle that's attached to the servo. The 58mm is just a guide and different servos need different lengths. I had to adj mine quite a lot to get it centred with straight wheels and a 90 degree angle. Hope this helps |
Author: | nashies [ Sun Feb 12, 2012 19:33:58 ] |
Post subject: | Re: T3 servo saver alignment problem |
Thank a lot Martin, I will try on that... |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |