T3 2012 for drifting?

camo · **Joined:** Mon Jan 30, 2012 12:09:46 **Posts:** 3

hello, just want to know if anyone here has actually used a T3 for drifting rather than racing?
If so can u help me out with drifting set ups on the T3 plz?

Hipspickle · **Joined:** Wed Nov 30, 2011 20:56:47 **Posts:** 9

Setups for drifting are very personal, I use a 2009 T3 nowadays with following setup:

-Ride height 5mm F&R
-Droop around 6mm F and 5mm R
-Spool F&R
-UR 30w with 3 hole pistons
-3.0 F and 2.8 R springs
-Camber 0 degrees F&R

Hope this helps, should work (or not, its personal) on your ´12 too.

camo · **Joined:** Mon Jan 30, 2012 12:09:46 **Posts:** 3

Thank u for some info

dubbull · **Posted:** Mon Feb 06, 2012 08:30:20

i too will be using mine for drift. im not going for any setups.
mine is setup for carpet but ive changed the camber (full on for the looks) and made the suspension harder.
i really cant setup yet until motor etc are mounted and i will more then likely play with the setup once its rolling.
as Hipspickle has mentioned drifting is more down to what makes you feel confortable rather then the setup.

camo · **Joined:** Mon Jan 30, 2012 12:09:46 **Posts:** 3

Hmm see I was told by someone that for drifting go softer shocks. I have ordered a set of Xray soft/medium shocks to try.
I also swapped the Diffs around running the spool in the rear, makes the car handle completely different it is way more tail happy like that.

XRAY - Model racing cars

T3 2012 for drifting?

Who is online