| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| overturn of the model https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12262 |
Page 1 of 1 |
| Author: | Butuzov Alexey [ Wed Jan 25, 2012 15:16:04 ] |
| Post subject: | overturn of the model |
On the new carpet I was faced with a very good grip and the overturn of the model. What are ways to reduce the overturn of the model ? (I used the standard setup) |
|
| Author: | Stanley Bąk [ Wed Jan 25, 2012 17:15:21 ] |
| Post subject: | Re: overturn of the model |
rear and front shock more upright front posiotion on clamps: f2 0mm 1000cst gear diff oil |
|
| Author: | Martin Hudy [ Thu Jan 26, 2012 08:25:16 ] |
| Post subject: | Re: overturn of the model |
Hi Stanley is right, expect front shock more up. This provides even more steering so if you want less steering lay down the front shocks Plus: harder rear anti-roll bar 2.8 springs in front harder shock oil 6.4 downstop in the front decrease the steering angle (maximum 25 degree) remove the ackermann shim If the traction is really high, you can use 2000 in the rear diff. You will get less turn in and the car will be more stable on-power |
|
| Author: | Parakalein [ Mon Jan 30, 2012 15:52:45 ] |
| Post subject: | Re: overturn of the model |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|