| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| New radio changes https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12241 |
Page 1 of 1 |
| Author: | Ruben_qlc [ Mon Jan 16, 2012 00:52:40 ] |
| Post subject: | New radio changes |
Hello everybody. Actually from 1997 I use radio Futaba 3VC, this is very old. I can't use exponencial steering, and others configurations. I just go to buy the sanwa exzes x, is the radio that jilles groskamp and andy moore, etc. uses. Do you think I will improvement? Thank you. Regards. |
|
| Author: | Skiddins [ Mon Jan 16, 2012 02:19:02 ] |
| Post subject: | Re: New radio changes |
Probably won't make any difference. You do have Expo on the steering on the 3VC (it's what I use) The wheel version of your radio, settings are the same. Skiddins P.S. You asked about Expo a few months back |
|
| Author: | Ruben_qlc [ Mon Jan 16, 2012 12:00:34 ] |
| Post subject: | Re: New radio changes |
Thank you for your answer. But my radio is 3VC, not the 3VCS. I think that it can't buy today. I can't configurate the exponencial because is too old, and the younger servos are from other technologies: "When I turn the exp steering to -50% for example, the wheels turn to the right. When you change the exp steering the wheels musn't turn. Other example is on brake. It only works when I apply the full brake stick." When I turn left to right. Wheels have a lot of vibration. Perhaps I would do a video for other people can see it. Sorry for my english. Thank you Skiddins. |
|
| Author: | Skiddins [ Mon Jan 16, 2012 12:24:59 ] |
| Post subject: | Re: New radio changes |
| Author: | Ruben_qlc [ Tue Jan 17, 2012 01:27:47 ] |
| Post subject: | Re: New radio changes |
Hello Skiddins. My receiver is Futaba R603FS Specktrum. And the servo steering is Airtronics digital servo 94746. Regards. |
|
| Author: | Skiddins [ Tue Jan 17, 2012 02:01:11 ] |
| Post subject: | Re: New radio changes |
Check if the receiver needs the transmitter to be set to PPM or PCM mode. Skiddins To get EXP, press 'Direct' then press the top middle button 'ST.EXP', that's it, steering expo. |
|
| Author: | Ruben_qlc [ Tue Jan 17, 2012 11:49:08 ] |
| Post subject: | Re: New radio changes |
I don't remember if the radio uses PCM o PPM, I think is PPM. I will see today. About the steering exp, yes is that configuration that I try to change, but impossible jaja. Thank you. I tell you something this night. Regards. |
|
| Author: | Ruben_qlc [ Mon Jan 30, 2012 01:06:27 ] |
| Post subject: | Re: New radio changes |
Sorry for late Skiddins. I use PPM module. Regards. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|