XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T3 2012 droop Setting https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12222 |
Page 1 of 1 |
Author: | Maui_tim [ Mon Jan 09, 2012 00:58:25 ] |
Post subject: | T3 2012 droop Setting |
I am trying to set my droop to below 5mm and cannot. What determines how much droop you can have? is it shock length? is it the link between the hub and bulkhead? once I try to go below 5mm, the adjustment screw comes off on the chassis and won't go any less than 5mm. I also have a problem setting the ride height below about 5mm. My shock collar it bottomed out against the top of the shock body. any help would be appreciated. |
Author: | Andrew Webber [ Mon Jan 09, 2012 05:33:04 ] |
Post subject: | Re: T3 2012 droop Setting |
Sounds like the shocks are too short. Check overall length, all should be exactly 64mm. |
Author: | Zorberman [ Thu Jan 12, 2012 21:45:51 ] |
Post subject: | Re: T3 2012 droop Setting |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |