XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
spec r driveshafts on xray t3 prob https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12130 |
Page 1 of 1 |
Author: | moggy12 [ Fri Jan 06, 2012 09:57:29 ] |
Post subject: | spec r driveshafts on xray t3 prob |
i use the new version 2 spec r ecs front driveshafts on my xray t3 the problem is the wheel nuts keep coming loose ( never came loose on the original xray driveshafts )was told to use serrated wheel nuts i did this but after a few runs still came loose any one got any ideas how to stop the wheel nuts coming loose ? thanks |
Author: | cypher [ Fri Jan 06, 2012 11:44:40 ] |
Post subject: | Re: spec r driveshafts on xray t3 prob |
Ask in the Spec-R forum? RCTech could be a good source |
Author: | Skiddins [ Fri Jan 06, 2012 13:00:40 ] |
Post subject: | Re: spec r driveshafts on xray t3 prob |
What wheels were these problems occurring on. Since moving to serrated nuts a couple of years back I haven't had a single problem. |
Author: | moggy12 [ Fri Jan 06, 2012 15:30:13 ] |
Post subject: | Re: spec r driveshafts on xray t3 prob |
hi i use sorex 28 with jb insert all ready made so don't know make of wheel |
Author: | Nikos Georgiadis [ Wed Jan 11, 2012 17:26:45 ] |
Post subject: | Re: spec r driveshafts on xray t3 prob |
It doesn't matter what wheels do you use. I think the material of these driveshafts is not the same with xray's driveshafts (hudy spring steel) and with xray's wheel nuts. In my opinion, don't use aftermarket parts. You can always use the ECS driveshafts. |
Author: | YELLOWSHARK [ Thu Jan 12, 2012 17:27:18 ] |
Post subject: | Re: spec r driveshafts on xray t3 prob |
Yup I had the same problem – and I use XRAY ECS drives ![]() The best I ever had were from Poland I think and they were orange too ![]() ![]() |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |