XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Lenght shock absorber https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12066 |
Page 1 of 1 |
Author: | stevtec86 [ Wed Dec 21, 2011 21:58:47 ] |
Post subject: | Lenght shock absorber |
Sorry if i open continuos topic: ![]() I have ulterior question; for a asphalt track at low ttraction, since you should set the total length of the shock absorbers (tip)? I've set them all 4 to 63.00 mm about.It's ok or are short? There is a table, says that the recommended length of the shock absorbers, for carpet and asphalt tracks in the second of the track is low, medium or high traction? (A bit like the rebound) Than's for reply |
Author: | Martin Hudy [ Thu Dec 22, 2011 09:42:54 ] |
Post subject: | Re: Lenght shock absorber |
I always use same length, recommended in instruction manual. I do not think that the length of the shock can influence car perfrormance |
Author: | stevtec86 [ Thu Dec 22, 2011 10:31:49 ] |
Post subject: | Re: Lenght shock absorber |
Author: | Martin Hudy [ Thu Dec 22, 2011 11:12:33 ] |
Post subject: | Re: Lenght shock absorber |
that is how I measure the legth of the shock. I make sure that distance between shock ball and shock body is tha same on all 4 shocks as this is the only way how you can influence the length of the shock. I never measure the length of the whole shock |
Author: | stevtec86 [ Thu Dec 22, 2011 18:12:39 ] | ||
Post subject: | Re: Lenght shock absorber | ||
|
Author: | Tricksy [ Sat Dec 24, 2011 13:29:01 ] |
Post subject: | Re: Lenght shock absorber |
He's saying measure the length of the shock shaft that is showing its usually around 10mm |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |