Schumacher import sorex tyres.
Ride tyres are being used here in the uk now under the moorespeed brand - they definaitely offer silly amounts of grip, grip roll being a problem, its something I'm trying to solve now!!
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Stock and carpet setup https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12055 |
Page 1 of 1 |
| Author: | Ruben_qlc [ Mon Dec 19, 2011 01:28:50 ] |
| Post subject: | Stock and carpet setup |
Hello everybody. Anyone know a setup for carpet and pro-stock? Thank you, regards. |
|
| Author: | Martin Hudy [ Mon Dec 19, 2011 10:00:38 ] |
| Post subject: | Re: Stock and carpet setup |
I would start with the basic set up. Check the team drivers set ups in the database but check the tires used. If you drive with ride tires, search for set up sheet where Ride tires were used. |
|
| Author: | Skiddins [ Mon Dec 19, 2011 17:51:24 ] |
| Post subject: | Re: Stock and carpet setup |
What have you found to be the main difference between Ride and Schumacher tyres? |
|
| Author: | Martin Hudy [ Tue Dec 20, 2011 10:22:11 ] |
| Post subject: | Re: Stock and carpet setup |
Sorry but I never tried Schumacher tires. The main difference between Ride and tires like Sorex or LRP is its diameter. Ride tires are much bigger so they will make the car roll more, more air in tire means, higher chance of front tires overheating, more air in tires means more overall traction and higher risk of traction rolling |
|
| Author: | mb3195 [ Tue Dec 20, 2011 21:04:38 ] |
| Post subject: | Re: Stock and carpet setup |
Schumacher import sorex tyres. Ride tyres are being used here in the uk now under the moorespeed brand - they definaitely offer silly amounts of grip, grip roll being a problem, its something I'm trying to solve now!!
|
|
| Author: | Arran turner [ Tue Dec 20, 2011 22:55:32 ] |
| Post subject: | Re: Stock and carpet setup |
mb3195, please could you share your setup because on high traction carpet im struggling to get any grip at all, for me the tyres have no initial bite then oversteer on the exit of a corner. Arran |
|
| Author: | Martin Hudy [ Wed Dec 21, 2011 09:54:28 ] |
| Post subject: | Re: Stock and carpet setup |
Guys, if you use Ride tires, check this set up, the car was just awesome xform/index.php?act=view&ID=64&setup=t3_2012 note, it is set up for high traction, if your track has low traction, than use standard 1.2 anti roll bar in the rear |
|
| Author: | Arran turner [ Wed Dec 21, 2011 15:04:24 ] |
| Post subject: | Re: Stock and carpet setup |
Thanks martin, it is for high traction. |
|
| Author: | Arran turner [ Wed Dec 21, 2011 18:25:00 ] |
| Post subject: | Re: Stock and carpet setup |
Martin, are you using all 6 screws in the rear of the top deck? also i am using the t3 11 so does this setup still apply, i know how the shock towers on the 11 are one hole less so ive put them in that position. |
|
| Author: | Martin Hudy [ Wed Dec 21, 2011 18:38:59 ] |
| Post subject: | Re: Stock and carpet setup |
Hi Arran, yes, I use all 6 screws set up applies also for T3`11, you are correct with shock towers |
|
| Author: | Arran turner [ Wed Dec 21, 2011 18:50:12 ] |
| Post subject: | Re: Stock and carpet setup |
thank you, also i dont have the new roll centre bulkheads and im using 2 hole rear hubs so how many shims should i run on the uprights and steering blocks? |
|
| Author: | Martin Hudy [ Wed Dec 21, 2011 19:07:40 ] |
| Post subject: | Re: Stock and carpet setup |
4mm in the rear and 1.5 in the front. |
|
| Author: | Arran turner [ Wed Dec 21, 2011 19:08:58 ] |
| Post subject: | Re: Stock and carpet setup |
thanks |
|
| Author: | Ruben_qlc [ Sun Dec 25, 2011 15:13:06 ] |
| Post subject: | Re: Stock and carpet setup |
Thank you very much Martin. Regards. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|