| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Motor and gearing for t3 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12036 |
Page 1 of 1 |
| Author: | Moonie [ Wed Dec 14, 2011 00:28:39 ] |
| Post subject: | Motor and gearing for t3 |
I have a X-ray t3 and a Novak 3.5 ballistic with a havoc pro esc. I run it out doors on large pavement tennis courts with rubber tiers. I am using stock spur and a 20 tooth pinion. What is the best motor and gearing for this car and what rpm should a novak 3.5 ballistic turn to stay cool and run smooth? I had a 15 tooth pinion on it and it didn't run as well as the 20 tooth pinion the car was to jerkey on the gas. I also have a ballistic 8.5 would this be a better motor for my t3? |
|
| Author: | Martin Hudy [ Sat Dec 17, 2011 12:38:33 ] |
| Post subject: | Re: Motor and gearing for t3 |
Hi Moonie, I would suggest you to contact Novak for this question. i think you can ask them on rctech forum |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|