XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
h1 and h2 links t3 2010 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12020 |
Page 1 of 1 |
Author: | moggy12 [ Fri Dec 09, 2011 09:48:01 ] |
Post subject: | h1 and h2 links t3 2010 |
hi getting the front h1 h2 links for my t3 2010 do i need to put extra 1 mm spacer under top link on top of c hub to keep top links level ? thanks |
Author: | Skiddins [ Fri Dec 09, 2011 11:17:06 ] |
Post subject: | Re: h1 and h2 links t3 2010 |
Yes. The H1's etc make the link the same length, but 1mm higher, than L1 & L2 |
Author: | moggy12 [ Mon Dec 12, 2011 19:47:41 ] |
Post subject: | Re: h1 and h2 links t3 2010 |
Author: | Skiddins [ Tue Dec 13, 2011 00:56:24 ] |
Post subject: | Re: h1 and h2 links t3 2010 |
Author: | moggy12 [ Tue Dec 13, 2011 09:12:28 ] |
Post subject: | Re: h1 and h2 links t3 2010 |
Author: | brano [ Tue Dec 13, 2011 09:15:18 ] |
Post subject: | Re: h1 and h2 links t3 2010 |
Author: | moggy12 [ Tue Dec 13, 2011 09:28:40 ] |
Post subject: | Re: h1 and h2 links t3 2010 |
Author: | Skiddins [ Tue Dec 13, 2011 14:11:42 ] |
Post subject: | Re: h1 and h2 links t3 2010 |
Author: | Marek Gadomski [ Tue Dec 13, 2011 19:05:12 ] |
Post subject: | Re: h1 and h2 links t3 2010 |
8mm is enough 4mm-5 of shims and 4-3mm inside hub ![]() |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |