XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Serpent Springs https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1202 |
Page 1 of 1 |
Author: | fulcrum2 [ Fri Mar 11, 2005 18:01:13 ] |
Post subject: | Serpent Springs |
Author: | mario [ Fri Mar 11, 2005 18:17:49 ] |
Post subject: | |
Author: | Col [ Sun Mar 13, 2005 11:19:34 ] |
Post subject: | Have had both... |
Connection here is slow so i can't lookup the springs you mention, the original xray springs to my knowledge (serpent type) were... Pink: Soft Orange: Medium White: Hard Yellow: Hardest I changed to the xray springs and using the guide of spring rate in words medium, soft and hard, I then based my setup on this. Do not do this, i was given advice in these forums to stick the springs together compress them and find their = spring rates by which compressed equally. I made a massive mistake in taking medium to be old style medium ![]() ![]() (sorry if this is what the file shows mario) again connection too slow ![]() But i couldn't find a spring rate for the old springs ![]() |
Author: | brano [ Mon Mar 14, 2005 08:14:57 ] |
Post subject: | Re: Serpent Springs |
Author: | Col [ Mon Mar 14, 2005 10:43:21 ] |
Post subject: | Ta ... |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |