XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T3 2012 multiflex https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11991 |
Page 1 of 1 |
Author: | martin t [ Sun Nov 27, 2011 17:09:40 ] |
Post subject: | T3 2012 multiflex |
Just got my t3 2012 and can not see any multiflex settings is this correct? what are the flex settings if any |
Author: | stevtec86 [ Mon Nov 28, 2011 15:41:13 ] |
Post subject: | Re: T3 2012 multiflex |
I was also interested to know whether to adjust the flexibility of the frame are like those of version 2011 (by loosening the screws on Topdeck) Confirm that the old is like Q3 2011 or is it different? Thank you for any answers! | |
Author: | Marek Gadomski [ Mon Nov 28, 2011 22:37:18 ] |
Post subject: | Re: T3 2012 multiflex |
i'm using 6 screws at beginning of competition and next i put all screws before Q2 or even qualifing (mid grip) You will find time to put screws when car will loose speed (brake) when turning or just roll. ![]() |
Author: | Skiddins [ Mon Nov 28, 2011 23:16:19 ] |
Post subject: | Re: T3 2012 multiflex |
The use of screws would be like the T3'11, you need to remove screws to gain a little flex. Don't forget that the new top deck is far more flexible than the T3'11 version. Skiddins |
Author: | David_Ehrbar [ Mon Nov 28, 2011 23:55:12 ] |
Post subject: | Re: T3 2012 multiflex |
I always use at least the 4 screws in the front and 4 screws in the rear. This makes the car more robust against chassis-tweak. You do not gain much flex by removing some of these screws, especially the 4 at the front, but you lose a lot of robustness. |
Author: | martin t [ Tue Nov 29, 2011 02:27:44 ] |
Post subject: | Re: T3 2012 multiflex |
Thanks guys. I take it you can also use the 2 piece front suspension holders rather than the 1 piece one to gain more front flex and steering? |
Author: | Skiddins [ Tue Nov 29, 2011 12:26:50 ] |
Post subject: | Re: T3 2012 multiflex |
Author: | stevtec86 [ Tue Nov 29, 2011 22:41:59 ] |
Post subject: | Re: T3 2012 multiflex |
Author: | Skiddins [ Wed Nov 30, 2011 01:04:55 ] |
Post subject: | Re: T3 2012 multiflex |
Author: | stevtec86 [ Wed Nov 30, 2011 10:36:48 ] |
Post subject: | Re: T3 2012 multiflex |
Author: | Skiddins [ Wed Nov 30, 2011 12:10:19 ] |
Post subject: | Re: T3 2012 multiflex |
Author: | stevtec86 [ Wed Nov 30, 2011 13:09:56 ] |
Post subject: | Re: T3 2012 multiflex |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |