Colour matching outdrives; awesome
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Xray t2 009 drive shaft adapter consistently breaking https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11950 |
Page 1 of 1 |
| Author: | krschuerman [ Wed Nov 16, 2011 02:51:44 ] |
| Post subject: | Xray t2 009 drive shaft adapter consistently breaking |
Hello, I'm new to R/C and new to the forum. I purchased a used t2 009 in great condition. So far though the only thing consistent about my time on the track is that I'm almost guaranteed to break multiple composite front drive shaft adapters. I have yet to do anything more than run practice laps because I rarely get in a five minute run without a break. I did mention I'm new to this so I do hit/bump/rub the track rail pretty frequently but not usually all that hard. I have been taking it pretty easy trying to master the controls and running 4-5 seconds/lap behind more experienced drivers on my best laps. It just seems really odd that this part would break so consistently and easily. Any thoughts on what might be causing this problem? Thanks, Sherm |
|
| Author: | cypher [ Wed Nov 16, 2011 21:09:09 ] |
| Post subject: | Re: Xray t2 009 drive shaft adapter consistently breaking |
What do you run in front a spool? With alu outdrives? Maybe theses outdrives have been damaged and now kill the blades!? |
|
| Author: | krschuerman [ Wed Nov 16, 2011 21:53:20 ] |
| Post subject: | Re: Xray t2 009 drive shaft adapter consistently breaking |
I suppose it would be a spool, I don't have a differential. I have considered going to a diff, but haven't looked into it too deeply yet. I did order some aluminum out drives to see if they work better for me, but I'd like to try and find what's causing the composite ones to break so easily if I can. |
|
| Author: | cypher [ Thu Nov 17, 2011 22:41:27 ] |
| Post subject: | Re: Xray t2 009 drive shaft adapter consistently breaking |
If you rotate one wheel and the other follows in the same direction it is a spool (or locked Multi-Diff). If it rotates free in one direction it is a one-way. If the opposite wheel rotates in the different direction its the diff. The spool, Multi-Diff and Diff are differentiated easily. Just look in the manual or on Xray website. |
|
| Author: | YELLOWSHARK [ Mon Nov 21, 2011 16:08:20 ] |
| Post subject: | Re: Xray t2 009 drive shaft adapter consistently breaking |
Hi firstly to avoid any confusion, in XRAY parlance in the 009 manual they call the "Outdrives" on their spool Adaptors and on their diff Outdrives. I do not think we are talking about blades (XRAY parlance is Caps) here. I cannot really provide an explanatoion as to why the Adaptors would be breaking every race. All I can say is that during 4 years of driving 008s and 009s I have broken one Adaptor and that was in a seriously fast crash into an immovable trackside object which also substantially bent the motor mount bulkhead. My inclination is to say dismantle the entire front axle area - C-Hubs, suspension arm,driveshafts, spool and check everything and rebuild. If you are quite new to the sport try and get some help from a more experienced driver even if they do not drive an XRAY, they will probably spot anything obviously wrong to the trained eye. If you compare each component with itself on the other side that will help you spot something that looks wrong. |
|
| Author: | BILKO1 [ Fri Dec 02, 2011 03:11:04 ] |
| Post subject: | Re: Xray t2 009 drive shaft adapter consistently breaking |
I had a spell of breaking the outdrives so changed to titanium racing ones with the alloy sleaves not had a problem since. |
|
| Author: | Skiddins [ Fri Dec 02, 2011 15:28:18 ] |
| Post subject: | Re: Xray t2 009 drive shaft adapter consistently breaking |
One thing I found helped a bit with the spool outdrives was to wrap some cell tape around them a couple of times. THis helps the outfrive to distort a bit whithout snapping. It's not a miracle cure but might be worth trying. Skiddins |
|
| Author: | YELLOWSHARK [ Mon Dec 05, 2011 16:53:25 ] |
| Post subject: | Re: Xray t2 009 drive shaft adapter consistently breaking |
Colour matching outdrives; awesome
|
|
| Author: | cypher [ Mon Dec 05, 2011 21:41:26 ] |
| Post subject: | Re: Xray t2 009 drive shaft adapter consistently breaking |
I also thought: SWEEET! Where did you get the orange colored tape? |
|
| Author: | Skiddins [ Tue Dec 06, 2011 03:09:04 ] |
| Post subject: | Re: Xray t2 009 drive shaft adapter consistently breaking |
It was made by Much More (Part CS-TO), I've had it so long I can't remember where I bought it. Skiddins |
|
| Author: | Marek Gadomski [ Tue Dec 06, 2011 19:49:50 ] |
| Post subject: | Re: Xray t2 009 drive shaft adapter consistently breaking |
also xenon 
|
|
| Author: | krschuerman [ Thu Dec 08, 2011 14:08:05 ] |
| Post subject: | Re: Xray t2 009 drive shaft adapter consistently breaking |
I rebuilt the front end of the car and noticed a few places where the front axle may have been binding when the front suspension was compressed. I paid special attention to those areas as I put the car back together. Saturday I spent about 5 hours at the track and I didn't have to replace a single outdrive and since I was able to spend more time racing and less time fixing I shaved 2 seconds off my best lap. I'll call it a win. Thanks for all the suggestions. Sherm |
|
| Author: | YELLOWSHARK [ Wed Dec 14, 2011 01:50:47 ] |
| Post subject: | Re: Xray t2 009 drive shaft adapter consistently breaking |
Glad to hear you have fixed the problem (we hope!) |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|