| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| t2 007 spools https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11944 |
Page 1 of 1 |
| Author: | XAP [ Mon Nov 14, 2011 19:48:14 ] |
| Post subject: | t2 007 spools |
hey does anyone know if a 34T T3 spool will work for 007 ? |
|
| Author: | Stanley Bąk [ Mon Nov 14, 2011 20:16:02 ] |
| Post subject: | Re: t2 007 spools |
all t3s has got 38t spools |
|
| Author: | YELLOWSHARK [ Mon Nov 14, 2011 21:48:31 ] |
| Post subject: | Re: t2 007 spools |
T3s can run 34T spools, they just do not come with them. I suspect the real question is - can an 007 run a T3 spool? |
|
| Author: | WheelNut [ Wed Nov 16, 2011 03:11:19 ] |
| Post subject: | Re: t2 007 spools |
It is possible, but the pulleys will be misaligned by about 3mm, so the belt has to bend sideways a bit. I ran a 008 rear diff (same as T3) on my 007 for a year with no issues. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|