XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Gearing advice needed for T3R https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11938 |
Page 1 of 1 |
Author: | Edjuh99 [ Sun Nov 13, 2011 20:24:36 ] |
Post subject: | Gearing advice needed for T3R |
I'm building a T3R and need some advice on gearing. It is my first 1/10 so i'm not to sure about wich pinion to use. Motor: Castel creation 5700kv Sidewinder V2 combo LIPO: 2s Spur: 84 Any tips? |
Author: | cypher [ Mon Nov 14, 2011 07:30:10 ] |
Post subject: | Re: Gearing advice needed for T3R |
On what kind of track are you going to race? Large? Tight? The motor is quite powerful I would guess something around 7. But you have to check motor temperature after some minutes! Noone can tell you an exact & working gearing if he doesnt know the track and has the same motor. |
Author: | Edjuh99 [ Mon Nov 14, 2011 13:26:00 ] |
Post subject: | Re: Gearing advice needed for T3R |
Thanks for your responce cypher. I'm going to drive the T3R on a local carpark (Asphalt) long straight and only a view corners. Do you mean using a spur of 7 or do you mean a FDR of around 7. Edjuh |
Author: | cypher [ Mon Nov 14, 2011 20:29:17 ] |
Post subject: | Re: Gearing advice needed for T3R |
I would try a FDR between 7 and 8 and check for the temperature of ESC and motor. If both are not too hot than work in the direction of FDR 6. |
Author: | Edjuh99 [ Mon Nov 14, 2011 21:44:40 ] |
Post subject: | Re: Gearing advice needed for T3R |
Thanks cypher, will try that. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |