XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Parts Manteinance https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11935 |
Page 1 of 1 |
Author: | Ruben_qlc [ Fri Nov 11, 2011 02:32:19 ] |
Post subject: | Parts Manteinance |
Hello everybody. I have an important question. Which part do you recommended to buy fot maintenance? Because some parts are worn or bent For example I ussually buy: - front and rear belt - front and rear drive shaft - shocks absorber membranes - spool adapters What do you think? Regards, |
Author: | Ruben_qlc [ Fri Nov 11, 2011 02:45:54 ] |
Post subject: | Re: Parts Manteinance |
Say in other way. Which are the part that you recommended be new every race? Regards, |
Author: | Skiddins [ Fri Nov 11, 2011 03:03:37 ] |
Post subject: | Re: Parts Manteinance |
None, I would only replace any of those things during a meeting if absolutely necessary. But I keep spares of all of those things. |
Author: | CarbonJoe [ Fri Nov 11, 2011 04:10:53 ] |
Post subject: | Re: Parts Manteinance |
Wheel bearings and driveshaft blades as needed. If running the ECS driveshafts, replacement pins. Those are the common wear items. |
Author: | YELLOWSHARK [ Sun Nov 13, 2011 01:35:58 ] |
Post subject: | Re: Parts Manteinance |
The only part I would buy new for every race is tyres ![]() |
Author: | Luke123 [ Sun Nov 13, 2011 02:23:18 ] |
Post subject: | Re: Parts Manteinance |
Every time my car has a big hit i always check the screws which bolt the wishbone carriers onto the bulk heads. I also replace these every rebuild as i find they bend a tiny amount very quicklly. Also i have a few spare hinge pins as these bend. Wouldnt repalce the belts unless they are worn, Iv never worn out a belt to be fair. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |