I guess you cant believe anybody
I bought the Multi-Diff T3 LiPo for my T3'012 and tried the normal 52mm CVD (not the ECS!).
Suprisingly it works. I have to say that I run 1,5° camber. I didnt try if it works with more.
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Question about size of ECS to run with Muti-Diff Lipo https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11913 |
Page 1 of 1 |
| Author: | TLH [ Thu Nov 03, 2011 18:57:21 ] |
| Post subject: | Question about size of ECS to run with Muti-Diff Lipo |
I have pre-ordered the T3 2012 and I am going to place an order for a set of ECSs and I'm not sure which size to use. I will be installing the Multi-Diff Lipo in the front and I have no clue as to which size to get. The 50mm or 52mm? From my searching in this forum, I have found people stating that you need to use the 50mm when using the Multi-Diff, but, have found no conclusive answer. Is this true or will either of the two fit? If they will both fit, what are the pros and cons of each? I'd appreciate any help that anyone can provide!! |
|
| Author: | cypher [ Sun Nov 06, 2011 20:20:49 ] |
| Post subject: | XRAY Multi-Differential T3 LiPo 305105 |
Anyone on this? 50mm or 52mm for the Multi-Differential LiPo? |
|
| Author: | WheelNut [ Tue Nov 08, 2011 20:56:18 ] |
| Post subject: | Re: Question about size of ECS to run with Muti-Diff Lipo |
Well, the non-lipo version's product sheet states the following: "WARNING: When using the #305104 XRAY Multi-Diff™ on EU or US edition cars, only 50mm driveshafts must be used." BUT that's the older version. The lipo might be different. There are no remarks on the lipo multi diff product page stating 50mm driveshafts must be used. We need Martin in here! |
|
| Author: | TLH [ Wed Nov 09, 2011 02:43:19 ] |
| Post subject: | Re: Question about size of ECS to run with Muti-Diff Lipo |
Thanks for the help WheelNut! I had ran across the limitations for the older Diffs but I didn't see any for the Lipo Diff. I called RCA yesterday and spoke to either Ralph or Brian (can't remember which because I called a few times to check on my order). He said that either should fit fine. There will just be different steering characteristics is all. I specifally asked about the binding and wear issues I've heard about with the older Diff and 52mm ECS and he said that will not be an issue. I appreciate the help from you guys. I'm already glad I switched to Xray just from the community of support so far, as I won't have my car until tomorrow. I'll make sure to post how the 52's work with the Lipo Diff once I find out, so that others with the same question will know... |
|
| Author: | cypher [ Thu Nov 10, 2011 20:35:45 ] |
| Post subject: | Re: Question about size of ECS to run with Muti-Diff Lipo |
So means no warning no problem or did they forget to put in the warning? Based on my business experience you should not think that you know what the other guy meant... |
|
| Author: | cypher [ Sun Nov 13, 2011 10:00:45 ] |
| Post subject: | Re: Question about size of ECS to run with Muti-Diff Lipo |
My friend put a Multi-Diff LiPo in his T3'011. He says that the normal 52mm drive shafts are to long in connection with the Mult-Diff. He recognized this during build and didnt tried to drive it with 52mm. Maybe one of the Hudy's can really say something to this topic. |
|
| Author: | cypher [ Sun Nov 20, 2011 22:43:47 ] |
| Post subject: | Re: Question about size of ECS to run with Muti-Diff Lipo |
I guess you cant believe anybody I bought the Multi-Diff T3 LiPo for my T3'012 and tried the normal 52mm CVD (not the ECS!). Suprisingly it works. I have to say that I run 1,5° camber. I didnt try if it works with more. |
|
| Author: | TLH [ Sun Nov 20, 2011 23:07:05 ] |
| Post subject: | Re: Question about size of ECS to run with Muti-Diff Lipo |
Thanks for the info cypher! I'm in the process of building now. So, I'll see for sure how the ecs's fit soon and post my findings. |
|
| Author: | mb3195 [ Tue Nov 22, 2011 14:52:16 ] |
| Post subject: | Re: Question about size of ECS to run with Muti-Diff Lipo |
they do fit, got the same combo in my car, no issues at all!! |
|
| Author: | TLH [ Wed Nov 23, 2011 14:52:20 ] |
| Post subject: | Re: Question about size of ECS to run with Muti-Diff Lipo |
mb3 is right, they do fit! i finally got around finish building it and they seem to fit perfectly fine... |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|