To answer your question see a similar post:
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| striped screws. how to get them out? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=119 |
Page 1 of 2 |
| Author: | murfy [ Mon Sep 20, 2004 06:20:53 ] |
| Post subject: | striped screws. how to get them out? |
| Author: | brano [ Mon Sep 20, 2004 07:57:19 ] |
| Post subject: | |
To answer your question see a similar post:
|
|
| Author: | Jilles Groskamp [ Mon Sep 20, 2004 13:14:55 ] |
| Post subject: | |
| Author: | murfy [ Tue Sep 21, 2004 11:46:50 ] |
| Post subject: | |
| Author: | Chris Reilly [ Tue Sep 21, 2004 15:38:34 ] |
| Post subject: | |
| Author: | Jilles Groskamp [ Tue Sep 21, 2004 19:56:26 ] |
| Post subject: | |
| Author: | Chris Reilly [ Wed Sep 22, 2004 00:25:25 ] |
| Post subject: | |
My car will never sit that long without maintenance. Unless I have a long bussiness trip. |
|
| Author: | murfy [ Wed Sep 22, 2004 01:38:57 ] |
| Post subject: | |
i did try to spray so WD-40 on the scrwews hoping that it will soak in and make the screw easier to extract. but no it dosen't really work. all it does is make the car all slipery and shiny. |
|
| Author: | Giorgio [ Wed Sep 22, 2004 22:43:12 ] |
| Post subject: | Re: striped screws. how to get them out? |
| Author: | Dave Treacy [ Wed Sep 22, 2004 22:55:38 ] |
| Post subject: | |
| Author: | apolloa [ Wed Sep 22, 2004 23:19:10 ] |
| Post subject: | |
| Author: | Thistle [ Thu Sep 23, 2004 04:19:03 ] |
| Post subject: | |
| Author: | murfy [ Fri Sep 24, 2004 02:08:36 ] |
| Post subject: | |
| Author: | apolloa [ Fri Sep 24, 2004 02:21:00 ] |
| Post subject: | |
| Author: | apolloa [ Sat Sep 25, 2004 23:44:52 ] |
| Post subject: | |
| Author: | xray man [ Mon Sep 27, 2004 04:38:46 ] |
| Post subject: | striped screw heads |
Hi, the reason why the screws are doing that because their to soft a heads, to solve this problem u should go to a nuts and bolts place and show them the screw that u want and they will most likely give u a black screw wich is a lot stronger and can take a bit of punishment if it gets tight. i am unsure wat their called but they never strip. ill try to find out the name of them and report back. 
|
|
| Author: | xray man [ Mon Sep 27, 2004 04:42:42 ] |
| Post subject: | sory |
sorry about that guys i put 2 buy accident lol. |
|
| Author: | fkhanro [ Thu Oct 07, 2004 08:44:21 ] |
| Post subject: | |
| Author: | Tech7 [ Sat Oct 16, 2004 01:52:28 ] |
| Post subject: | |
| Author: | Keith Warnick [ Sat Oct 16, 2004 03:23:18 ] |
| Post subject: | |
| Page 1 of 2 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|