XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Mistakes in T3 2012 manual https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11871 |
Page 1 of 1 |
Author: | taz00 [ Thu Oct 20, 2011 09:50:28 ] |
Post subject: | Mistakes in T3 2012 manual |
Martin, I have found some mistakes in the T3 2012 instruction manual. First in page 6 bottom pic, the orientation in the notch in the diff case is wrong (at least in my case). The notch should be 90degrees clockwise to the entry point of the pin since this is where there is a recess in the case for the pin. Second in page 9 the chassis is marked front-back wrong. If I find any more as I continue the build I will post them here. |
Author: | Swanny [ Fri Oct 21, 2011 03:58:05 ] |
Post subject: | Re: Mistakes in T3 2012 manual |
If you look closer, it's the chassis that's the wrong way around. Not that these things are big deals, if you're familiar with XRay they're easily overlookd as the cars all go together much the same way. |
Author: | Martin Hudy [ Fri Oct 21, 2011 12:05:51 ] |
Post subject: | Re: Mistakes in T3 2012 manual |
Yes we know about these mistakes already. Mistakes will be fixed in the next batch of manuals. Thank you for your feedback and sorry for confusion |
Author: | taz00 [ Fri Oct 21, 2011 13:26:04 ] |
Post subject: | Re: Mistakes in T3 2012 manual |
No confusion. I have built enough T3s to hardly need a manual. I just made this post to inform you in case you did not already know. Also please check the assembly of the servo saver. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |