| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Nosram Dominator Evo https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1180 |
Page 1 of 1 |
| Author: | Col [ Tue Mar 08, 2005 14:30:25 ] |
| Post subject: | Nosram Dominator Evo |
Hey anyone got one of these ? Jilles, you face was on the back  So presume u do, well i got one and i also got a 6v fet servo :S
These don't have a FET lead but this has one coming out ? What should i do ? Don't really want to hack it off in case i use my spare servo (has fet) Also do i really need the capacitor etc on the motor and the diodes, what changes will they make, i have no clue, i know what they are just not what they do here ... Its all going in my fk05 when its here 
|
|
| Author: | Col [ Tue Mar 08, 2005 15:25:23 ] |
| Post subject: | Hmm |
Looking at the pics of the t1 fk05 they are using the same esc and the wire seems not to be there ! |
|
| Author: | ianp [ Tue Mar 08, 2005 16:05:14 ] |
| Post subject: | |
hi col, i have one very impressed with it. i heat shrinked the fet lead to prevent shorting out as i also use a 6v servo. the only problem i found was the cases fall apart and you need to resecure them. apart from that ive had no problems.i use the optional power caps.dunno whether it makes the car better but it looks good. use schotty diodes on the motor.ian |
|
| Author: | ianp [ Tue Mar 08, 2005 16:05:44 ] |
| Post subject: | |
hi col, i have one very impressed with it. i heat shrinked the fet lead to prevent shorting out as i also use a 6v servo. the only problem i found was the cases fall apart and you need to resecure them. apart from that ive had no problems.i use the optional power caps.dunno whether it makes the car better but it looks good. use schotty diodes on the motor.ian |
|
| Author: | Col [ Tue Mar 08, 2005 16:41:28 ] |
| Post subject: | Ta |
Its used in the pics for the fk05, and the fet lead looks non existant ? I am confused as to why they bothered, you just solder the fet lead to the positive terminal ? Well i did on my t1 and tc2 |
|
| Author: | Dave Treacy [ Tue Mar 08, 2005 17:01:37 ] |
| Post subject: | |
Col, soldering the fet lead from the servo to the batt+ will give you a varing voltage depending on your battery voltage. The FET lead give you a constant voltage, but I would still reccommend the use of a FET choke. PS if you're after one, I have a brand new one, in sealed box, for sale... |
|
| Author: | Col [ Tue Mar 08, 2005 17:09:22 ] |
| Post subject: | Hmm |
Ive got one, but what if i don't want the fet lead at all ? |
|
| Author: | Dave Treacy [ Tue Mar 08, 2005 17:25:52 ] |
| Post subject: | |
Cut it off |
|
| Author: | Col [ Tue Mar 08, 2005 17:31:52 ] |
| Post subject: | Sure ? |
Don't wanna break this esc before its even had a chance ! 
|
|
| Author: | Jilles Groskamp [ Tue Mar 08, 2005 18:13:07 ] |
| Post subject: | |
Hi Col, Well, I did run Nosram but not anymore. I never used a power capacitor on my speedo or diodes on teh motor. Sometimes I used the small capacito when I had some problems with interference. Just cut the Fet Lead like a inch of the case. I never used the Fet Lead so I cutted it compleet. I'm using a Hara Twister2 now and I'm really satisfied with it. Jilles |
|
| Author: | Col [ Tue Mar 08, 2005 19:15:36 ] |
| Post subject: | Ta Jilles |
Does this mean you don't like the dominator ? Was informed they were a good esc so i went for it 
Thanks for the replies guys  seems me and my wire cutters are to destroy this wire (carefully)
|
|
| Author: | 'X' [ Tue Mar 08, 2005 20:07:15 ] |
| Post subject: | |
Hi Jilles, Do you think its possibile to share with us a couple of profiles you used on the twister 2, since I am not really sure that I set up mine to it's full potential. I currently use 8 single motors. Thanks !!! |
|
| Author: | Jilles Groskamp [ Tue Mar 08, 2005 21:17:31 ] |
| Post subject: | |
| Author: | 'X' [ Tue Mar 08, 2005 23:57:27 ] |
| Post subject: | |
| Author: | chipmunk [ Thu Mar 10, 2005 01:02:06 ] |
| Post subject: | |
Hi it sounds realy stupid but does the Hara Twister 2 have ajustable programs like the nosram dom evo like brakes, punch. ect as i havent seen any buttons on it sorry cheers chipmunk |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|