| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Need more on power https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11722 |
Page 1 of 1 |
| Author: | NCALENDA [ Mon Sep 12, 2011 07:16:58 ] |
| Post subject: | Need more on power |
After running on the track today I'm finding the car is pushing too much and I want more on-power control. Here is my setup: Any suggestions would be greatly appreciated. |
|
| Author: | Skiddins [ Mon Sep 12, 2011 14:53:22 ] |
| Post subject: | Re: Need more on power |
Narrower shims at front wishbones More front camber (possible more rear camber as well) Less front droop Possible harder front spring. I would start with some of the above and see how they effect it. Your camber's are what sticks out the most as you dont' have particularly heavy springs so any roll will remove a lot of the contact area of the tyres. |
|
| Author: | kartdemon [ Mon Sep 12, 2011 19:21:32 ] |
| Post subject: | Re: Need more on power |
I would try the droop first. start simple obviously. |
|
| Author: | NCALENDA [ Tue Sep 13, 2011 00:03:50 ] |
| Post subject: | Re: Need more on power |
I will try less droop in the front to start with and test, then try the other suggestions. I have the roll-center in the back to -0.75, I was wondering if it is worth changing that to 0.00. At this point, I have plenty of rear traction but just want to add more on-power control as it forces me to let off on the throttle too much when I need to turn into a corner. |
|
| Author: | Skiddins [ Tue Sep 13, 2011 14:46:25 ] |
| Post subject: | Re: Need more on power |
| Author: | NCALENDA [ Wed Sep 14, 2011 21:30:10 ] |
| Post subject: | Re: Need more on power |
| Author: | Hagberg [ Sat Sep 24, 2011 10:09:12 ] |
| Post subject: | Re: Need more on power |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|