| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| One Way https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=117 |
Page 1 of 1 |
| Author: | Ron [ Sun Sep 19, 2004 19:35:36 ] |
| Post subject: | One Way |
| Author: | Tonyv [ Sun Sep 19, 2004 20:33:58 ] |
| Post subject: | |
| Author: | chipmunk [ Sun Sep 19, 2004 23:47:34 ] |
| Post subject: | |
| Author: | Tonyv [ Mon Sep 20, 2004 11:22:08 ] |
| Post subject: | |
| Author: | leenoble0 [ Fri Sep 24, 2004 12:07:20 ] |
| Post subject: | |
Likewise I race on a tight indoor carpet track and was tempted to get a one way. We race a T27 control tyre, so would you recommend a one way or stick with the stock diff?? Note your comments re foams and rubber but what are T27's, not really either?? |
|
| Author: | Tonyv [ Fri Sep 24, 2004 12:15:05 ] |
| Post subject: | |
T27s are rubber tyres. So in this case I'd recommend trying the one-way. If the car is too aggressive for you and you have trouble finding a setup you like, switch to a normal diff or the spool (solid axle). |
|
| Author: | Mark Payne [ Sat Sep 25, 2004 12:24:05 ] |
| Post subject: | One way on T27 |
| Author: | kevinm [ Sat Sep 25, 2004 17:33:37 ] |
| Post subject: | |
| Author: | Golden Boy [ Sun Sep 26, 2004 01:42:52 ] |
| Post subject: | |
| Author: | kevinm [ Sun Sep 26, 2004 03:29:17 ] |
| Post subject: | |
| Author: | Golden Boy [ Sun Sep 26, 2004 03:48:03 ] |
| Post subject: | |
| Author: | leenoble0 [ Sun Sep 26, 2004 17:19:07 ] |
| Post subject: | |
Gone to buy a one way diff and noticed that there is also a one way pulley with grooved one way bearing. Is this needed as well??? |
|
| Author: | Tonyv [ Sun Sep 26, 2004 21:21:32 ] |
| Post subject: | |
No, just the diff. You can run a one-way pulley if you want, but all the team drivers prefer to run the front one-way or diff or spool with fixed pulleys on the layshaft. |
|
| Author: | Mister-E [ Sun Oct 10, 2004 14:54:44 ] |
| Post subject: | |
| Author: | Tonyv [ Sun Oct 10, 2004 16:11:16 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|