XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
HELP with pinion for T3 EU https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11647 |
Page 1 of 1 |
Author: | agnisimo [ Mon Aug 15, 2011 19:16:29 ] |
Post subject: | HELP with pinion for T3 EU |
Hello, I want to buy pinion for may Xray T3 EU. I'm using Tekin RS and Vector X12 17.5T, Spur 84/48 stock Race on Carpet. Tyre: Sorex 28R Could you recommend how much teeth must be? Thank you. |
Author: | Stanley Bąk [ Mon Aug 15, 2011 19:32:20 ] |
Post subject: | Re: HELP with pinion for T3 EU |
it depands on track and etc give me photo of a track the best option is to buy set of xray's pinions |
Author: | agnisimo [ Mon Aug 15, 2011 19:41:52 ] |
Post subject: | Re: HELP with pinion for T3 EU |
At this momment I'dont have photo of the track. But there are a lot of corners. And only one straight. (~20-25meters) Can you specify what you think could fit around? (As example from 22 to 25) |
Author: | Stanley Bąk [ Mon Aug 15, 2011 19:50:24 ] |
Post subject: | Re: HELP with pinion for T3 EU |
you need fdr from 6-8 you need pinions from 20 to 26(including those 20 and 26) but gearing depands on boost and etc look around,and ask for help another drivers,what they recomend for kinda track |
Author: | Browny_37 [ Mon Aug 15, 2011 20:23:06 ] |
Post subject: | Re: HELP with pinion for T3 EU |
I run a X12 13.5 and 10.5 with a Tekin RS Pro indoors and usually gear at 8.4 or 8 FDR (19 or 20 Tooth) Find it gives a decent top speed and enough punch out of corners with suitable timing settings. |
Author: | YELLOWSHARK [ Mon Aug 15, 2011 21:15:17 ] |
Post subject: | Re: HELP with pinion for T3 EU |
If cost is an issue I would start with 23 (6.94) then add a 24 then a 22. If you can get several then leave Turbo at zero, set Boost to 40 and throttle profile 2 or 3 and try each pinion and see which gearing is suiting you best. Then add some timing keeping your eye on temperature. I suspect with your track you want to concentrate more on boost for midfield punch rather than turbo (maybe limit to 10). All a bit of guesswork on may part though without knowing your track ![]() |
Author: | agnisimo [ Wed Aug 17, 2011 09:31:32 ] |
Post subject: | Re: HELP with pinion for T3 EU |
Thank you. I will try on weekend. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |