XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
New T3 Geardiff installed https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11579 |
Page 1 of 4 |
Author: | Pigiolino [ Tue Jul 19, 2011 21:08:13 ] | |||
Post subject: | New T3 Geardiff installed | |||
Arrived and installed. Someone has already tried this item? It is noticeable improvement in driving than SPEC R? Bye Pier
|
Author: | Bytestream [ Tue Jul 19, 2011 21:22:44 ] |
Post subject: | Re: New T3 Geardiff installed |
Your probably one of the first people to get this item outside of team drivers, so .. the big question is .. Does it leak? |
Author: | Pigiolino [ Tue Jul 19, 2011 21:59:34 ] |
Post subject: | Re: New T3 Geardiff installed |
Mounted yesterday, seals and OR are perfect.On weekend I will use on the asphalt track. Pier |
Author: | Marek Gadomski [ Tue Jul 19, 2011 22:18:35 ] |
Post subject: | Re: New T3 Geardiff installed |
i drived about 9 legs and no oil leak and works smooth, it's lighter ![]() ![]() ![]() |
Author: | romuald31 [ Tue Jul 19, 2011 22:51:41 ] |
Post subject: | Re: New T3 Geardiff installed |
Hello from France, the XRay gear diferential is great. The gears are made from a good nylon, the axles cross too. The outdrives are made from treated aluminium. The sealing is operated with flat-paper seal and an O-Ring. Here's some weight about the T3 transmission... The spool: The ball dif: The SpecR gear dif: The XRay gear dif: Front and rear difs in my car. Au revoir. |
Author: | Stanley Bąk [ Tue Jul 19, 2011 23:07:07 ] |
Post subject: | Re: New T3 Geardiff installed |
do you see any big difference in drivin' beetwen spec r's and xray's diff? |
Author: | nevergiveup [ Wed Jul 20, 2011 09:16:14 ] |
Post subject: | Re: New T3 Geardiff installed |
Author: | Stanley Bąk [ Wed Jul 20, 2011 13:41:33 ] |
Post subject: | Re: New T3 Geardiff installed |
ok,thanks! |
Author: | flo0206 [ Wed Jul 20, 2011 13:42:09 ] |
Post subject: | Re: New T3 Geardiff installed |
i'm a noob to racing. have been practicing the last 3 month. after kicking out the ball diff on saturday i put in the gear diff with 700cts oil in rear. tight small track with low grip. PB was set 1.2 sec lower than before and much more consistant i love it -it helped my driving ![]() |
Author: | Mark Christopher [ Wed Jul 20, 2011 20:22:23 ] |
Post subject: | Re: New T3 Geardiff installed |
mbmodels in leeds UK has stock if you carnt find one, got mine today |
Author: | sidecarphil [ Wed Jul 20, 2011 21:21:01 ] |
Post subject: | Re: New T3 Geardiff installed |
Author: | Stanley Bąk [ Wed Jul 20, 2011 22:21:59 ] |
Post subject: | Re: New T3 Geardiff installed |
Author: | sidecarphil [ Wed Jul 20, 2011 22:54:44 ] |
Post subject: | Re: New T3 Geardiff installed |
you need to sand the smaller half of the diff housing before adding the gasket , this makes sure the cases are flat ,and use some good grease on the X rings then it wont leak from the outputs either , i got 2 with oil in them and neither leak , 1 also with puty in it ;0 |
Author: | xtaiji [ Thu Jul 21, 2011 03:43:16 ] |
Post subject: | Re: New T3 Geardiff installed |
I just put a new gear diff, but it's too tight with 52mm. They said "Fits both 50mm & 52mm drive shafts." Rear arms do not move freely. ![]() |
Author: | flo0206 [ Thu Jul 21, 2011 08:05:23 ] |
Post subject: | Re: New T3 Geardiff installed |
Author: | Marek Gadomski [ Thu Jul 21, 2011 21:17:32 ] |
Post subject: | Re: New T3 Geardiff installed |
Author: | sidecarphil [ Fri Jul 22, 2011 07:30:18 ] |
Post subject: | Re: New T3 Geardiff installed |
Author: | Mark Christopher [ Fri Jul 22, 2011 10:03:09 ] |
Post subject: | Re: New T3 Geardiff installed |
Author: | spike8625 [ Sat Jul 23, 2011 03:27:08 ] |
Post subject: | Re: New T3 Geardiff installed |
Author: | sidecarphil [ Sat Jul 23, 2011 08:33:14 ] |
Post subject: | Re: New T3 Geardiff installed |
Page 1 of 4 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |