Not used hole in EU rubber cars.
if you really want, it lowers roll center but i tried it and car was feeling more twitchy
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Rear uprights https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11529 |
Page 1 of 2 |
| Author: | Stanley Bąk [ Sat Jun 25, 2011 20:43:44 ] |
| Post subject: | Rear uprights |
what gives outer hole in rear uprights? how it works? |
|
| Author: | Marek Gadomski [ Sun Jun 26, 2011 18:55:37 ] |
| Post subject: | Re: Rear uprights |
Not used hole in EU rubber cars. if you really want, it lowers roll center but i tried it and car was feeling more twitchy
|
|
| Author: | Stanley Bąk [ Sun Jun 26, 2011 20:44:35 ] |
| Post subject: | Re: Rear uprights |
i like kinda agressive style of driving:D i wanted to try today this,but i just forgot about it-.- |
|
| Author: | Marek Gadomski [ Sun Jun 26, 2011 22:13:09 ] |
| Post subject: | Re: Rear uprights |
I suggest you to use 1-hole uprights like most of top drivers |
|
| Author: | Stanley Bąk [ Mon Jun 27, 2011 08:22:16 ] |
| Post subject: | Re: Rear uprights |
when i come back from camp maybe i'll buy them |
|
| Author: | Hagberg [ Tue Jun 28, 2011 22:33:15 ] |
| Post subject: | Re: Rear uprights |
Outer hole - longer rear link which gives more out of corner steering (on-power) but slightly less turn-in due to decreased rear roll. |
|
| Author: | Marek Gadomski [ Wed Jun 29, 2011 01:34:10 ] |
| Post subject: | Re: Rear uprights |
| Author: | Stanley Bąk [ Thu Jun 30, 2011 13:45:50 ] |
| Post subject: | Re: Rear uprights |
its got LESS ROLL so it roll less less roll-less traction,but more cornering speed |
|
| Author: | Skiddins [ Thu Jun 30, 2011 14:41:40 ] |
| Post subject: | Re: Rear uprights |
I believe the outer hole is used more in foam racing where they have a lot more grip. |
|
| Author: | YELLOWSHARK [ Sat Jul 02, 2011 17:23:23 ] |
| Post subject: | Re: Rear uprights |
I think you all have it wrong  Lengthening the camber link will produce a lower RC at any given degree of roll thus producing more roll. The XRAY setup book supports this, refer page 25 (T'008 edition) |
|
| Author: | Stanley Bąk [ Sat Jul 02, 2011 19:08:47 ] |
| Post subject: | Re: Rear uprights |
| Author: | YELLOWSHARK [ Sat Jul 02, 2011 20:34:35 ] |
| Post subject: | Re: Rear uprights |
| Author: | sidecarphil [ Sat Jul 02, 2011 20:47:11 ] |
| Post subject: | Re: Rear uprights |
All i know is i tried the 1 hole uprights and i dont like them |
|
| Author: | Stanley Bąk [ Sat Jul 02, 2011 20:57:53 ] |
| Post subject: | Re: Rear uprights |
| Author: | YELLOWSHARK [ Sat Jul 02, 2011 21:16:15 ] |
| Post subject: | Re: Rear uprights |
| Author: | sidecarphil [ Sat Jul 02, 2011 21:27:29 ] |
| Post subject: | Re: Rear uprights |
i just didnt like th feel of the car , it just didnt react like i wanted it too cost me 12 euros to find out i dont like it  never mind i will sell them with the T3 when i get ready with the Kyosho i have bought |
|
| Author: | zzoebl [ Sat Jul 02, 2011 22:32:12 ] |
| Post subject: | Re: Rear uprights |
| Author: | sidecarphil [ Sat Jul 02, 2011 22:47:46 ] |
| Post subject: | Re: Rear uprights |
| Author: | Stanley Bąk [ Sun Jul 03, 2011 07:43:34 ] |
| Post subject: | Re: Rear uprights |
u'll see and then say few words to us about diference beetwen those two cars |
|
| Author: | sidecarphil [ Sun Jul 03, 2011 09:26:03 ] |
| Post subject: | Re: Rear uprights |
no i wont .... I am too professional to say bad things on an open forum about a chassis or speedo/motor I know the car is good , drove my friends a few weeks ago and it was awsome |
|
| Page 1 of 2 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|