| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| T3 11 rear sliding https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11525 |
Page 1 of 1 |
| Author: | Oman-Muscat [ Fri Jun 24, 2011 15:07:20 ] |
| Post subject: | T3 11 rear sliding |
guys need your help i bought the T3 11 and i am racing in a technical track asphalt, low traction, i tried all kind of set ups, but the rear of the car still slides on corners (drifts on corners)my friends tried the car and they saw this, they are having the Mi4 and it doesn't do that. can you please recommend a set up, i have a race in 5 days |
|
| Author: | Stanley Bąk [ Fri Jun 24, 2011 16:47:57 ] |
| Post subject: | Re: T3 11 rear sliding |
try my set up: if it doesn't work change position of quick roll center from 1(left,down) to 3(left,up) it will lower your roll center and your car will roll more so you will have more traction |
|
| Author: | Marek Gadomski [ Fri Jun 24, 2011 20:56:59 ] |
| Post subject: | Re: T3 11 rear sliding |
Try this set For me it gives most traction to rear.  Remember try diffrent rear downstops values and put higest and longest (middle hole upright or std. do not try the outer hole) as possible rear camber link. finest thing is you should have fresh tires. on old you may have that problems |
|
| Author: | Stanley Bąk [ Fri Jun 24, 2011 21:52:29 ] |
| Post subject: | Re: T3 11 rear sliding |
i drove on those vtec 33x and i had perfect tracion!:D i think you remember that:P You drove my car:D |
|
| Author: | Oman-Muscat [ Thu Jun 30, 2011 22:35:58 ] |
| Post subject: | Re: T3 11 rear sliding |
Team, thanks for your support the car runs well, i worked with our local hobby store "speed Hobby" we used the huddy all in one set up solution, went to the basic set up did some minor tweaks, the car runs like sharp knife "I love it"
|
|
| Author: | Stanley Bąk [ Fri Jul 01, 2011 08:16:34 ] |
| Post subject: | Re: T3 11 rear sliding |
to be on the top and be happy about tje carb u have to have set up station:) |
|
| Author: | YELLOWSHARK [ Sat Jul 02, 2011 11:44:24 ] |
| Post subject: | Re: T3 11 rear sliding |
| Author: | Marek Gadomski [ Sat Jul 02, 2011 23:39:39 ] |
| Post subject: | Re: T3 11 rear sliding |
setup book says that outer hole makes roolcenter lower so increases rear grip bu it doesn't it make car better cornering speed but nobody uses it with rubber tires because it makes car very aggressive and lose |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|