XRAY - Model racing cars

Hi,

Might be going this weekend and just wondered what or if any changes I should make to my recent setup at my local track ? xform/index.php?act=view&ID=513&setup=t3_2011

Only race at WL once and that was with the old surface.

Thanks.

Looks OK to me, not too different from my own setup.

1 or 2t down on the pinion (that's my own experience as I don't know anything about your ESC and motor)
I run 1mm or 0.5 on the front camber link and slightly less front camber.

Other than that I believe you'll be OK.

Ironically I will be starting with the setup that I ended up with at Aldershot on Sunday, which is a bit different to what I usually run

Tyres will last ages as well.
Use the BRCA Sorex 32's as their grip is excellent and they last well, I did the two day national on one set and they still had some life left in them.

If you want to see how the changes went I'll be the guy behind the black Saab 9000 near the burger van

Skiddins

Ok cheers,

that should actually be 1mm on the camber link, my mistake.

Hope the 32's last longer than they do at Aldershot