XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Charger-how many ampers? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11514 |
Page 1 of 1 |
Author: | Stanley Bąk [ Sat Jun 18, 2011 19:59:40 ] |
Post subject: | Charger-how many ampers? |
how many ampers do i need for this charger? |
Author: | Marek Gadomski [ Sun Jun 19, 2011 15:28:13 ] |
Post subject: | Re: Charger-how many ampers? |
smthg about 12-15 |
Author: | Stanley Bąk [ Sun Jun 19, 2011 15:48:10 ] |
Post subject: | Re: Charger-how many ampers? |
nope:D i need exatctly 276W so when i've got 13.8V i need 20A to charge and discharge with full power:) but i just wanted to be sure do you know where can i buy kinda power supply? but i want something cheap and it does not have to be dedicated to rc:) |
Author: | Marek Gadomski [ Sun Jun 19, 2011 19:55:49 ] |
Post subject: | Re: Charger-how many ampers? |
you don't need 20 a to dischg. because charger gets power form battery ![]() |
Author: | Stanley Bąk [ Sun Jun 19, 2011 20:08:54 ] |
Post subject: | Re: Charger-how many ampers? |
oh... you are right im sory:P |
Author: | sidecarphil [ Sun Jun 19, 2011 21:28:24 ] |
Post subject: | Re: Charger-how many ampers? |
i run 2 x LRP pulsar3's and a set of tyre warmers on a 20a power supply and never have a problem !!!! |
Author: | Browny_37 [ Mon Jun 20, 2011 00:58:55 ] |
Post subject: | Re: Charger-how many ampers? |
I've a Muchmore 24A PSU. I've had three chargers running from it comfortably. I was charging at 10A with my Cell Master Legend. |
Author: | Skiddins [ Mon Jun 20, 2011 01:35:07 ] |
Post subject: | Re: Charger-how many ampers? |
When charging you should only need a small amount more current than you are using to charge. Your charger will not take 10A as well as the 10A it's putting into the battery pack. Skiddins |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |