already have!
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| new to xray! https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11493 |
Page 1 of 1 |
| Author: | mb3195 [ Fri Jun 10, 2011 22:49:25 ] |
| Post subject: | new to xray! |
evening all, back after a 5 year break and have just got myself a new xray t3 11. really impressed with the quality, best car i have built in 23 years of racing! well done!! i've done the servo mod, anything else you guys would recommend, plannng on running it on carpet only with rubbers (sorex 28). cheers, keep up the good work!! |
|
| Author: | Stanley Bąk [ Fri Jun 10, 2011 23:01:46 ] |
| Post subject: | Re: new to xray! |
what motor you've got? do you have set up tools? |
|
| Author: | mb3195 [ Fri Jun 10, 2011 23:13:04 ] |
| Post subject: | Re: new to xray! |
good question on motor, got a speedpassion 13.5t in my mi4 with a hw xtreme stock esc, got myself another hw for the xray but havent decided on motor (still 13.5t though) have heard good thing anou the orca range? any suggestions? have a full setup station. |
|
| Author: | Stanley Bąk [ Fri Jun 10, 2011 23:36:19 ] |
| Post subject: | Re: new to xray! |
on what track will you race? |
|
| Author: | mb3195 [ Fri Jun 10, 2011 23:38:37 ] |
| Post subject: | Re: new to xray! |
indoors on carpet, ardent raceway will be my most regular. medium sized 12.8 second laps. need more grunt out of the corner, sp is probably too smooth indoors? |
|
| Author: | Stanley Bąk [ Fri Jun 10, 2011 23:43:48 ] |
| Post subject: | Re: new to xray! |
i did not ride sp 13.5r on indor carpet track lets start with original set up and then "play" with your set up read whole set up book its useful:) |
|
| Author: | mb3195 [ Fri Jun 10, 2011 23:49:43 ] |
| Post subject: | Re: new to xray! |
already have!
|
|
| Author: | Stanley Bąk [ Fri Jun 10, 2011 23:52:22 ] |
| Post subject: | Re: new to xray! |
so its great! |
|
| Author: | Bytestream [ Thu Jun 23, 2011 16:34:28 ] |
| Post subject: | Re: new to xray! |
If your new to Xray then .. I would suggest putting a setscrew into the unused hole in your rear uprights (where the camber links mounts) if you have not done so already. This will beef up the one weak point in the car (IMO). I'm not sure if the newer kits come with the CVD pins that have flat spots (running update?), if not get yourself some of those or use a tool to grind a flat spot into the pin yourself. With the standard shafts, they never come out. Being from the US, the DUO 3 based motors are great for spec classes (13.5, 17.5) with lots of torque. I don't know why but I don't hear that much about them from across the pond. |
|
| Author: | Browny_37 [ Thu Jun 23, 2011 19:00:43 ] |
| Post subject: | Re: new to xray! |
For ardent raceway, a popular setup is usually the Tekin and Nosram PureEvo / LRP X12 13.5T setup. Mines quite a monster out of the corners, GM Speedo/Motor Combo seem to give a bit more of a kick up the bum onto the straight though. Then again im running moderate settings for the infield and quite a lump of turbo for the straight. Im usually over at Ardent a couple meets a month, so may bump into you. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|