Yeh, its good to see Xray test a lot of different ideas at these events.
Martin has been busy on the CAD by the looks of it at the factory
Bottom chassis looks very interesting
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| EC warmup https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11479 |
Page 1 of 1 |
| Author: | Craig McPhee [ Mon Jun 06, 2011 04:10:43 ] |
| Post subject: | EC warmup |
Surprised this hasn't been discussed yet, but some interesting parts on the xray cars in the pits at the EC warm up TCX style bottom deck https://picasaweb.google.com/1089071648 ... 5617902738 XRAY gear diffs front and rear https://picasaweb.google.com/1089071648 ... 0000868674 Different top deck https://picasaweb.google.com/1089071648 ... 6179379122 |
|
| Author: | Stanley Bąk [ Mon Jun 06, 2011 17:48:45 ] |
| Post subject: | Re: EC warmup |
I think they are testing some new technical solutions:) |
|
| Author: | Stefan Chodzynski [ Mon Jun 06, 2011 18:46:21 ] |
| Post subject: | Re: EC warmup |
Yeh, its good to see Xray test a lot of different ideas at these events. Martin has been busy on the CAD by the looks of it at the factory Bottom chassis looks very interesting
|
|
| Author: | Marek Gadomski [ Mon Jun 06, 2011 20:15:37 ] |
| Post subject: | Re: EC warmup |
i saw they are testing new shocks. martin should put in the new chassis new servo post hole |
|
| Author: | Stanley Bąk [ Mon Jun 06, 2011 20:41:26 ] |
| Post subject: | Re: EC warmup |
and he should give wider main plate:) |
|
| Author: | Marek Gadomski [ Mon Jun 06, 2011 21:29:16 ] |
| Post subject: | Re: EC warmup |
| Author: | Stanley Bąk [ Mon Jun 06, 2011 22:26:47 ] |
| Post subject: | Re: EC warmup |
if you have more space you will be able to move more electronics |
|
| Author: | Martin Hudy [ Wed Jun 15, 2011 15:33:11 ] |
| Post subject: | Re: EC warmup |
guys do not forget that the width of the chassis has huge effect on car performance, if it is too narrow, it push because too much flex, if it is too wide, than it is too stiff and there is no traction. Yeah little busy, already tested three different chassis designs since that time but always same or very similar lap times as with standard one. |
|
| Author: | snowmiu19 [ Thu Jun 16, 2011 13:15:40 ] |
| Post subject: | Re: EC warmup |
Wooo Hoo hopefully T3 2012 will come out soon  Is the exotek conversion chassis good? the ones with the different servo mount position? Regards Calvin |
|
| Author: | Bytestream [ Thu Jun 16, 2011 15:47:09 ] |
| Post subject: | Re: EC warmup |
| Author: | Stanley Bąk [ Thu Jun 16, 2011 21:11:12 ] |
| Post subject: | Re: EC warmup |
| Author: | mb3195 [ Thu Jun 16, 2011 23:33:08 ] |
| Post subject: | Re: EC warmup |
i've managed to get 3 servo posts in mine!  one to hold the servo in, another at the front of the servo and another at the back to stop it moving when under load. got a grub screw in both the front and back ones to fine tune the "grab". also got servo tape, but trust me, my servo is moving nowhere!!  will try n get some pics up at the weekend. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|