| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| 1 hole rear uprights https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11345 |
Page 1 of 1 |
| Author: | sidecarphil [ Tue Apr 26, 2011 18:36:10 ] |
| Post subject: | 1 hole rear uprights |
hi guys and galls when is it best to use these ?? i have had them for a while now and thought i would try them out this weekend Thanks Phil |
|
| Author: | markw [ Tue Apr 26, 2011 23:20:35 ] |
| Post subject: | Re: 1 hole rear uprights |
taking from http://www.ampdraw.com/product.php?usec ... ctid=19267 Molded-composite rear upright features built-in 0 of outboard toe to improve traction and prevent suspension geometry changes in serious crashes. This 1-hole upright may be used on high-traction tracks or tracks with long sweepers, since the position of the center hole will allow faster driving through those corners because of better cornering speed. More roll center positions can be easily adjusted by adding shims between the upright and the turnbuckle ball joint. The rear upright feature small but robust 5x10x4 ball-bearings to minimize unsprung weight |
|
| Author: | Hagberg [ Wed Apr 27, 2011 10:59:55 ] |
| Post subject: | Re: 1 hole rear uprights |
Less turn-in, but more mid corner and exit steering. The car will feel more smooth as the rear end rolls less. |
|
| Author: | sidecarphil [ Wed Apr 27, 2011 22:29:07 ] |
| Post subject: | Re: 1 hole rear uprights |
ok thanks Alex But low traction or high ?? |
|
| Author: | Marek Gadomski [ Wed Apr 27, 2011 22:59:21 ] |
| Post subject: | Re: 1 hole rear uprights |
better for high |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|