| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Big Asphalt Track Setup https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11334 |
Page 1 of 1 |
| Author: | Craig McPhee [ Wed Apr 20, 2011 03:42:52 ] |
| Post subject: | Big Asphalt Track Setup |
Hi all, I'm going to be racing my T3'11 at a large nitro track in the coming months and I'm wondering what setup changes normally work on these sort of tracks. You can see the track here, the straight is 50m and the surface is medium grip asphalt. http://www.nearmap.com/?ll=-33.938479,1 ... d=20100715 I've run on the track a number of times but my car has never been very good there there, it seems to lack corner speed in the long radius corners but can also break loose from the middle to exit of the corner. The long corners also load up the (control) tyres a lot which can cause them to overheat. Any suggestions are most welcome, I've been running kit setup mostly and making changes to springs, oil, and shock positions mainly but haven't found any huge improvements. |
|
| Author: | Marek Gadomski [ Wed Apr 20, 2011 07:55:00 ] |
| Post subject: | Re: Big Asphalt Track Setup |
harder rear anti roll bar for more steering. also shorter wheel base for more oversteer in hairpins. |
|
| Author: | Skiddins [ Wed Apr 20, 2011 14:36:23 ] |
| Post subject: | Re: Big Asphalt Track Setup |
You might find using the right additive can make a big difference due to the fuel and foam rubber that will be on the track. CS Max Grip or Tweak might be good. Skiddins |
|
| Author: | Craig McPhee [ Thu Apr 21, 2011 03:38:39 ] |
| Post subject: | Re: Big Asphalt Track Setup |
| Author: | Hagberg [ Thu Apr 21, 2011 11:04:23 ] |
| Post subject: | Re: Big Asphalt Track Setup |
| Author: | Craig McPhee [ Wed Apr 27, 2011 01:13:12 ] |
| Post subject: | Re: Big Asphalt Track Setup |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|