XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Parabolic curve https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11317 |
Page 1 of 1 |
Author: | Ruben_qlc [ Thu Apr 14, 2011 17:30:30 ] |
Post subject: | Parabolic curve |
Hello everybody. What do you recommended me tips of setup for maximum grip on the parabolic curves? I can't throttle, because car understeed when I apply throttle. Thank you very much. Regards. |
Author: | Loheswaran [ Sat Apr 16, 2011 01:11:49 ] |
Post subject: | Re: Parabolic curve |
what do you mean by parabolic curves?????????? |
Author: | Ruben_qlc [ Sat Apr 16, 2011 02:34:55 ] |
Post subject: | Re: Parabolic curve |
Very big and fast curve of 180º, as the last curve of estoril circuit |
Author: | Hagberg [ Sun Apr 17, 2011 21:32:43 ] |
Post subject: | Re: Parabolic curve |
Hmm, so I guess you need more on-power and mid corner steering. Some suggestions that usually helps: - Harder rear anti-roll bar - Heavier rear shock oil - Front kick-up - Less rear toe-in - More front uptravel (downstop) |
Author: | Ruben_qlc [ Mon Apr 18, 2011 01:27:03 ] |
Post subject: | Re: Parabolic curve |
Thank you very much for the suggestions Alexander. Suggestiones: - Harder rear anti-roll bar. If I only have the anti-roll bar standar, Can I put the rear anti-roll on inner? or outer? - Heavier rear shock oil. PERFECT ! - Front kick-up. I don't know what is this. - Less rear toe-in. PERFECT. 3º as final toe? with outboard toe? - More front uptravel (downstop). You want to say less downstop? For example 7? Thank you again. Regards, |
Author: | Hagberg [ Thu Apr 21, 2011 11:15:55 ] |
Post subject: | Re: Parabolic curve |
To make the rear anti-roll bar slightly stiffer you can use the outer mounting position on the arm. Front kick-up is when you have front mounting point of the arm higher than the rear. The front arm thus is mounted with an angle. For instance, you can add a 0.5mm shim under the front suspension mounting point. It is a similar effect to using more overall caster (c-hub). I would suggest 2.5 or 3 degrees overall rear toe. No outboard toe should be used. No I mean a smaller number for example 5 instead of 6. |
Author: | Ruben_qlc [ Sun Apr 24, 2011 23:11:18 ] |
Post subject: | Re: Parabolic curve |
Ok. Thank you very much Alexander. I will put here, when I have been raced, for comments for other drivers. Regards, |
Author: | Varaosa [ Fri Sep 30, 2011 15:54:07 ] |
Post subject: | Re: Xtray T3 Register... |
Hello, XTray team & drivers... I just want to ask little question about Xtray production... I have bought your Xray T3 range of radio-controlled car, and I received a package like this Xtray Certificate of Authenticity serial number tag, which will be probably the car's registration and such, and I read somewhere that you had a VIP room, but it is what I have looked at from that: http:/ / www.mytsn.com/ so there is not a viable site and does not get through here to register a car, so what do you have the correct current and updated on site car registration and other information for? ![]() |
Author: | ChrisP [ Mon Oct 03, 2011 03:16:20 ] |
Post subject: | Re: Xtray T3 Register... |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |