XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T3R help https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11251 |
Page 1 of 1 |
Author: | fmrc [ Tue Mar 22, 2011 18:52:35 ] |
Post subject: | T3R help |
Ok i bought a T3R while I was on my R&R leave from afghanistan and will be returning home in about 3 weeks or so what I need is what do I need to get that doesnt come in the kit to run in boosted 17.5. The track I will be running on will be asphalt treated with VHT. any help will be great thanks |
Author: | Stanley Bąk [ Tue Mar 22, 2011 20:35:24 ] |
Post subject: | Re: T3R help |
you need set of pinion and spur gears and some extra shock oil and springs |
Author: | Hagberg [ Tue Mar 22, 2011 23:21:07 ] |
Post subject: | Re: T3R help |
You might want to buy the front and rear anti-roll bar sets: 302401, 303401. These will improve handling for most conditions and surfaces. |
Author: | Green Wing [ Wed Mar 23, 2011 18:56:09 ] |
Post subject: | Re: T3R help |
Also some adjustable turnbuckles (at least for the camber) are a pleasure when racing. It would be: 2x #303212 Alu Adjustable Turnbuckle M3 L/R 26mm - 7075 T6 (2) (for setting the camber at all) 1x #302612 Alu Adjustable Turnbuckle M3 L/R 39mm - 7075 T6 (2) (for easier setting of the front toe) I don't know what VHT means but if the track has lower or normal grip I think the kit setup is really good then. I started with 350cps (included) and with the front piston with 2 holes and the rear piston with 3 holes. On tracks with a lot of grip I think that the silver springs in the rear and the purple springs (#308396 4pcs.) in the front with 3 holes and 500cps around is pretty good. I pretty much feel comfortable with that on my T3R. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |