XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
wheelbase https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11225 |
Page 1 of 1 |
Author: | stone [ Tue Mar 15, 2011 16:22:20 ] |
Post subject: | wheelbase |
Hello, I studied several set-up sheets that are online with the basic set-up sheet that was submitted by X-Ray for carpet rubber and compared them. I am confused about the drawing where it says 0 1 1 (front) and 2 1 0 (rear). Basis set-up (front) - wheelbase: blank X 0 1 1 for example t3_2011-Martin Hudy-European-Indoor-Championship-2011 (front) - wheelbase: 1 mm X X 0 1 1 What is the difference? |
Author: | Skiddins [ Tue Mar 15, 2011 20:33:48 ] |
Post subject: | Re: wheelbase |
If you look closely at the diagram where those numbers are, the arrow points to just in front of the wishbones. I read those numbers as how many mm of shims are in front of those wishbones. If like your example, there is an X above the 0 then there are no shims in front of that wishbone, if there is an X above both 1 and 2 then there are 3mm of shims in front of the wishbone. I think putting an X above 0 as well as 1 or 2mm is a mistake though. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |