XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Drive shafts-problem https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11216 |
Page 1 of 1 |
Author: | Stanley Bąk [ Sun Mar 13, 2011 20:23:25 ] |
Post subject: | Drive shafts-problem |
Hi, I was built my t3'11 and when im giving it some trothle whereas(in same time) im tirning left or right it is sound bad...(like grrrrrrrrrrrrrrr) It looks its got to much steer but when i dicrease steering to 45% its quiet what should i do? oh,and what thing is it ok: fornt: rear: did i give good drive shafts? shouldnt it be inversely? (I'VE GOT THICKER ON FRONT AND THINER ON REAR) HELP ME OUT!!! |
Author: | cypher [ Sun Mar 13, 2011 20:50:06 ] |
Post subject: | Re: Drive shafts-problem |
You got the drive shafts wrong. The steel ones (brown) go in front and the aluminium ones (black) go rear. I don't own a T3'011 but it is not unusual that there is this sound if you have a spool in front and turn in much. But reducing it to 45% sounds quite much to me. Are you sure everything in front is build right and equal on left and right? |
Author: | Stanley Bąk [ Sun Mar 13, 2011 21:00:32 ] |
Post subject: | Re: Drive shafts-problem |
i will change those shafts and im going to tell you is it working:) |
Author: | Stanley Bąk [ Mon Mar 14, 2011 17:49:05 ] |
Post subject: | Re: Drive shafts-problem |
it works!!! thanks! |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |