| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| ECS drive shafts question https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11139 |
Page 1 of 1 |
| Author: | Zak [ Tue Feb 15, 2011 00:48:34 ] |
| Post subject: | ECS drive shafts question |
Hello guys, thank you in advanced for yours reply  So, I assemblied on my t3 the alu-drive adapters on the front, using ECS drive shafts 52mm long. Would be better to use 50mm long or is it the same think? I know that the 52mm long are better than 50mm on the carpet track for example, following instruction info. Bye. |
|
| Author: | Teemu Leino [ Tue Feb 15, 2011 09:35:41 ] |
| Post subject: | Re: ECS drive shafts question |
Zak, You will have faster direction change with 50mm driveshafts and little bit more turn in. 52mm driveshafts are more smooth to drive. Teemu |
|
| Author: | Zak [ Tue Feb 15, 2011 22:18:18 ] |
| Post subject: | Re: ECS drive shafts question |
Thank you very much Teemu I'm trying the 52mm long on the track carpet, unfortuntely with some braking problem...but I think that the problem could be the screw of the tyre nut too much long.... |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|