| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| T3 11 Titanium Screw set https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11108 |
Page 1 of 1 |
| Author: | TC Racer [ Wed Feb 02, 2011 21:25:18 ] |
| Post subject: | T3 11 Titanium Screw set |
Hello, Anyone make a complete Titanium Screw set for the T3 11? thanks, Chris |
|
| Author: | Browny_37 [ Thu Feb 03, 2011 03:32:28 ] |
| Post subject: | Re: T3 11 Titanium Screw set |
I cant imagine why you would need a titanium screw set? I've had to add 45grams of ballast weight to my car to get it to the BRCA legal limit of 1350g. I wouldn't imagine you'd run much lighter over in the US? |
|
| Author: | steven olsen [ Thu Feb 03, 2011 13:34:48 ] |
| Post subject: | Re: T3 11 Titanium Screw set |
| Author: | David_Ehrbar [ Thu Feb 03, 2011 15:19:36 ] |
| Post subject: | Re: T3 11 Titanium Screw set |
There are big differences in component weughts. There are servos between 40 and 65 grams Threre are batteries between 240 and 315 grams and there is a wide range of electronics, motors and not forget about tires. Even Bodies can make a difference of maybe 15 to 20 grams. |
|
| Author: | goos [ Sat Feb 05, 2011 23:15:10 ] |
| Post subject: | Re: T3 11 Titanium Screw set |
I have around 90g extra on my car to make it 1350g Using: Tekin RS Sanwa srg-bl (low profile) MRT ponder lw body Gens Ace 50c 5000mah battery Sorex 32r tires Gm 10.5t motor |
|
| Author: | Browny_37 [ Thu Feb 17, 2011 23:43:15 ] |
| Post subject: | Re: T3 11 Titanium Screw set |
I weighed it on Sunday and found out it was 1387g with 40g of weight on, so i took 25g off of the car. Totally different car to drive once i'd done that. No pictures im affraid, but my spec is the following Tekin RS Pro Nosram PureEvo 13.5 Moorespeed 5000mah Savox LowPro Servo Sorex 28JB Normal Sized Spektrum 2.4ghz Rx And aluminium shocks. |
|
| Author: | dpatterson [ Wed Mar 02, 2011 07:07:08 ] |
| Post subject: | Re: T3 11 Titanium Screw set |
| Author: | dpatterson [ Wed Mar 02, 2011 07:10:13 ] |
| Post subject: | Re: T3 11 Titanium Screw set |
Also check out these screws for......they work great for mounting you wing. http://www.lunsfordracing.com/mm5/merch ... =ROCKSCREW |
|
| Author: | Manson [ Mon Feb 06, 2012 12:06:30 ] |
| Post subject: | Re: T3 11 Titanium Screw set |
Up, I m trying to find a good titanium set for my 2012. Bad heard about 3 racing and yeahracing. lunsfordracing seems to be good, but with +/- 180 dollards shipped.... With 6800 lipo and ride asphalt tyres it s easy to exceed 1350 gr. |
|
| Author: | MeBeMikey [ Sun Feb 12, 2012 21:54:50 ] |
| Post subject: | Re: T3 11 Titanium Screw set |
I have titanium screws on my car. They tend to shear off and I've noticed that the diameter of the threaded part is a tiny tiny bit smaller. I had issues with maintaining camber dues to this. The upper bulk would shift over in a collision sometimes. I now only use kit screws in the bulks and suspension mounts. Mine were bought on eBay from China. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|