T3 11 Titanium Screw set

TC Racer · **Posted:** Wed Feb 02, 2011 21:25:18

Hello,

Anyone make a complete Titanium Screw set for the T3 11?

thanks,
Chris

Browny_37 · **Joined:** Sun Nov 07, 2010 00:32:53 **Posts:** 45

I cant imagine why you would need a titanium screw set?

I've had to add 45grams of ballast weight to my car to get it to the BRCA legal limit of 1350g.
I wouldn't imagine you'd run much lighter over in the US?

steven olsen · **Joined:** Tue Oct 26, 2010 15:14:24 **Posts:** 11

David_Ehrbar · **Posted:** Thu Feb 03, 2011 15:19:36

There are big differences in component weughts.
There are servos between 40 and 65 grams
Threre are batteries between 240 and 315 grams
and there is a wide range of electronics, motors and not forget about tires.
Even Bodies can make a difference of maybe 15 to 20 grams.

goos · **Posted:** Sat Feb 05, 2011 23:15:10

I have around 90g extra on my car to make it 1350g

Using:

Tekin RS
Sanwa srg-bl (low profile)
MRT ponder
lw body
Gens Ace 50c 5000mah battery
Sorex 32r tires
Gm 10.5t motor

Browny_37 · **Joined:** Sun Nov 07, 2010 00:32:53 **Posts:** 45

I weighed it on Sunday and found out it was 1387g with 40g of weight on, so i took 25g off of the car. Totally different car to drive once i'd done that.

No pictures im affraid, but my spec is the following

Tekin RS Pro
Nosram PureEvo 13.5
Moorespeed 5000mah
Savox LowPro Servo
Sorex 28JB
Normal Sized Spektrum 2.4ghz Rx
And aluminium shocks.

dpatterson · **Posted:** Wed Mar 02, 2011 07:07:08

dpatterson · **Posted:** Wed Mar 02, 2011 07:10:13

Also check out these screws for......they work great for mounting you wing.

http://www.lunsfordracing.com/mm5/merch ... =ROCKSCREW

Manson · **Joined:** Sun Sep 25, 2011 16:32:08 **Posts:** 9

Up,

I m trying to find a good titanium set for my 2012. Bad heard about 3 racing and yeahracing.

lunsfordracing seems to be good, but with +/- 180 dollards shipped....

With 6800 lipo and ride asphalt tyres it s easy to exceed 1350 gr.

MeBeMikey · **Joined:** Wed Feb 08, 2012 11:18:11 **Posts:** 17

I have titanium screws on my car. They tend to shear off and I've noticed that the diameter of the threaded part is a tiny tiny bit smaller. I had issues with maintaining camber dues to this. The upper bulk would shift over in a collision sometimes. I now only use kit screws in the bulks and suspension mounts.

Mine were bought on eBay from China.

XRAY - Model racing cars

T3 11 Titanium Screw set

Who is online