XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Shock bottoms fixings - T3 2011 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11106 |
Page 1 of 1 |
Author: | djzipper [ Mon Jan 31, 2011 12:10:37 ] |
Post subject: | Shock bottoms fixings - T3 2011 |
Please forgive this question, but how are you supposed to fix the bottom of the shocks to the wishbones? Mine keep coming undone, the bottom keeps coming off etc. |
Author: | Phil C [ Mon Jan 31, 2011 12:19:16 ] |
Post subject: | Re: Shock bottoms fixings - T3 2011 |
Hi, The correct way to do it is to screw the grub screw into the wishbone so that there is 3mm of thread left exposed. Then use a 3mm allen driver to screw the pivot ball which is captured in the bottom of the shock end to the grub screw. If you tighten it this way you should have no issues with them coming loose. Hope this helps, Phil Chambers Team XRAY UK |
Author: | djzipper [ Mon Jan 31, 2011 12:58:59 ] |
Post subject: | Re: Shock bottoms fixings - T3 2011 |
All makes sense now!! Thanks for your help. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |