XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T3 New Bulkhead Clamps https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11096 |
Page 1 of 1 |
Author: | Craig McPhee [ Tue Jan 25, 2011 08:02:47 ] |
Post subject: | T3 New Bulkhead Clamps |
Hi there, I understand the new bulkhead clamps will be released mid to late feb. I was wondering which hole and how many millimetre of spacers I would use to achieve the same roll centre and camber gain as the H and L blocks? Thanks Craig |
Author: | brano [ Tue Jan 25, 2011 08:46:51 ] |
Post subject: | Re: T3 New Bulkhead Clamps |
All this info will be available with the release of new #302028-O bulkhead clamps. |
Author: | Skiddins [ Wed Feb 02, 2011 22:46:05 ] |
Post subject: | Re: T3 New Bulkhead Clamps |
I have the Max Carbon versions and with those 3mm of spacers is the same as the L1 L2 QRC's Skiddins |
Author: | Ronaldo808 [ Wed Feb 23, 2011 01:12:52 ] |
Post subject: | Re: T3 New Bulkhead Clamps |
there available in the uk now what exactly do i need to complete this set up ![]() ![]() XR302028-O AND: |
Author: | Spiffysteve [ Wed Feb 23, 2011 18:16:45 ] |
Post subject: | Re: T3 New Bulkhead Clamps |
Author: | Ronaldo808 [ Wed Feb 23, 2011 22:04:08 ] |
Post subject: | Re: T3 New Bulkhead Clamps |
thank you very much for doing this. So am i right in thnking i can use the old ball joints with this set up ![]() ![]() |
Author: | Fred Hubbard [ Wed Feb 23, 2011 22:32:47 ] |
Post subject: | Re: T3 New Bulkhead Clamps |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |