XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T3R help https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=11065 |
Page 1 of 1 |
Author: | mdhyams [ Mon Jan 17, 2011 00:44:08 ] |
Post subject: | T3R help |
I am having issues, When I make a turn to the right at a high speed my car traction rolls. The car shocks are set to factory specs minus the springs are 3.0 fronts and 2.4 rears. The rear toe is 1 toe, everything else is per the factory setup. I have added some weight to the battery side to balance the car. I am running a spec Jaco Blue tire. Thanks for the help. Mike |
Author: | BadSign [ Mon Jan 24, 2011 04:45:11 ] |
Post subject: | Re: T3R help |
Soften your springs, especially the fronts. A White Front/ Yellow rear would probably work very well. You need to let the the suspension compress and the chassis lean or roll more into the corner. Thicker damping, a lower roll center, and softer sway bar on the front end will also help. |
Author: | Marek Gadomski [ Mon Jan 24, 2011 19:00:11 ] |
Post subject: | Re: T3R help |
use harder compound of tires |
Author: | Andrew Webber [ Tue Jan 25, 2011 02:24:13 ] |
Post subject: | Re: T3R help |
carpet or asphalt? It only traction roles when turning to the right? U sure the chassis is balanced? Cheers Andrew |
Author: | Hagberg [ Sat Jan 29, 2011 22:15:09 ] |
Post subject: | Re: T3R help |
Add more rear toe in. Use the 2.6 rear and 2.8 front springs as a starting point. Put less overall downtravel front and rear. Make sure that the car is tweaked correctly by lifting the chassis from the set-up board with a tool or a knife to see if the tires are lifting simultaneously from the ground. If not, adjust with downstops or preload on the springs. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |